Power amplifier Jamo MPA-201
Briefly about the product
- stereo power amplifier
- power 200 W (per channel)
- signal-to-noise ratio 100 dB
- harmonic distortion 0.1%
- weight 5.3 kg
ModelMPA-201 has an output power of 100x2 W at a load of 4 ohms (in bridged mode - 200x1 W / 4 ohms). It has line I / O for daisy chaining multiple power amplifiers into a common circuit. The MPA-201 amplifies signals for acoustics in the full frequency range (20–20,000 Hz), and when set to Low Pass filtering mode, it acts as a low-frequency power amplifier for passive subwoofers. The amplifier is equipped with an automatic on / off function according to the presence of an input signal, regardless of what state it was in (the function can be turned off).
Provides double protection - against overload and overheating; when triggered, the amplifier goes into standby mode. The MPA-201 is a truly versatile amplifier. It can be used with any full-range speaker as well as passive subwoofers (such as the IW1060SW or IW860SW) or in other applications where really high power is required.Daisy chain connection The device is equipped with line inputs and outputs for daisy chaining multiple components.Input detection The automatic power on / off function of the amplifier is based on the presence or absence of an input signal. The signal detection function can be disabled if desired.Protection circuits The amplifier is equipped with overheating and short circuit protection circuits. Speaker Cable Sil The AG (Audio Grade) speaker cable has a transparent sheath and is available in three sizes with two conductors. The AG series is designed for traditional installations, while the 14/4 - 16/2 series are specially designed for use in special projects. The cables of this series have colored sheaths, which makes it easy to distinguish them from each other. Cable cross-sections: 0.75 mm2, 1.50 mm2 and 2.50 mm2 Standard 19 "mounting bracket. It accommodates up to three MPA-101 (or MPA-201) multifunctional amplifiers.