Top 8 wall chasers: characteristics

It is hard to imagine a modern overhaul of an apartment or a private house without the use of a wall chaser. Indeed, without this tool, it is impossible to cope with such a difficult task as laying wiring and pipes. Fortunately, the modern market is filled with a wide variety of models, and among them there are both expensive and very budgetary options. However, choosing a quality wall chaser is not always easy. If only because even an experienced user can get lost in numerous characteristics, not to mention a beginner.

Wall chasers rating

8 Wall chaser Hammer STR150

The Hammer Flex STR150 wall chaser is a 1700 W double-disc chasing chaser with a disc diameter of 150 mm. Maximum cutting depth 43 mm, three steps of width adjustment - 15/20/30 mm. Equipped with soft start and overload protection. Designed to obtain grooves (grooves) in concrete, masonry, stone and similar materials for the subsequent laying of heating systems, gas supply and electrical wiring. High power and rotational speed translate into increased productivity, while the additional handle enhances working comfort.

7 Wall cutter BISON ZSH-P30-1400 PST

Power at the chasing cutter Zubr ZSH-P30-1400 PST - 1400 W. It accommodates discs with an outer diameter of 125 mm and a landing diameter of 22.2 mm. The engine accelerates them to a speed of 8800 rpm.
The Zubr ZSH-P30-1400 PST wall chaser is used for cutting bricks, light and medium concrete. With its help, cavities are prepared for laying pipes, wiring and other communications. This tool will delight you with high productivity, it quickly copes with cutting materials.
The cutting depth is set from 0 to 30 mm, and the width is 3-30 mm. You will adjust these parameters to the dimensions of the required cavity. You can attach a vacuum cleaner to the wall chaser. It collects the waste generated during cutting, making it easier to clean up after the completion of the work.
All parts of the wall chaser are protected from dust. This ensures the exceptional reliability of the tool, it will serve you for a long time. The speed stabilization system allows you to maintain high performance. The rotational speed of the disk does not drop under load, which has a positive effect on the comfort of the working process.

6 Wall chaser Makita SG1251J

Wall chaser Makita SG1251J - equipment from a world-renowned manufacturer. This company has established itself from the best side. You will be able to fully use the presented tool and be sure of its reliability.
The Makita SG1251J wall chaser is used to perform chases. It can be used to cut a long furrow in the material. In the future, it is used to lay various cables, it is possible to hide the wires and not spoil the interior of the room.
The power of the presented tool is 1400 W. This is enough for equipment of this class. The maximum idle speed is 10,000 rpm.
The number of working disks is 2 pieces. The parameters of the strobes performed can be adjusted taking into account the necessary indicators. The depth is in the range of 0-30 mm, the width is 6-30 mm.
A soft start system has been implemented.It eliminates the additional load on the engine when starting the equipment. A vacuum cleaner can be attached to the equipment if necessary. It will remove the generated dust and ensure comfortable work.

5 Wall chaser CALIBER SHTBE-2600 / 230M

Manual electric wall chaser ShTBE-2600 / 230m is designed for cutting grooves (grooves) in concrete, foam concrete, brick, stone and similar materials exclusively without the use of water.

4 Wall cutter BISON ZSH-30-1200 T

Professional wall chaser Zubr ZSH-30-1200 T is used for cutting bricks and lightweight concrete. With its help, cavities are prepared for laying pipes, wiring and other communications. The tool is equipped with a 1200 W motor, it is prepared for significant loads during operation.
A saw blade with an outer diameter of 125 mm is used in the channeler. Its landing size is 22.2 mm. The cutting width of the materials is 3-30 mm, and the depth is 0-30 mm. These values ​​are promptly set during operation, taking into account the dimensions of the required cavity for communications.
There is a protective cover in the wall chaser. It protects the operator from accidental injury from contact with the saw blade. In addition, to increase the safety of the tool, a blocking of unintentional launch is implemented.
The spindle in the groove cutter Zubr ZSH-30-1200 T is blocked when replacing the discs. When installing other equipment, you do not need to use additional tools to fix the spindle in the desired position. This wall chaser is very compact and manoeuvrable with comfortable handles and simple controls.

3 Wall chaser Makita SG150

If you need to make grooves in concrete, stone or brick walls, the Makita SG-150 wall chaser is the ideal tool. It is a professional instrument with low vibration and noise levels. In case of overheating, the device switches itself off. With him it is very easy to make channels and grooves for pipelines and electrical wiring.
The main features of the Makita SG-150 model are the accuracy and reliability of the cut, as well as high productivity. The presence of a dustproof 1800 W motor, as well as two saw blades of 150 mm in size, makes it possible to make sufficiently deep and wide cuts. Among the main functions of the device, it is necessary to highlight the ability to adjust the speed, kerf width, smooth start. The wall chaser guarantees stable operation even under heavy loads. The advantage of the product is overload protection. The device is equipped with a tightening wrench, intermediate rings and a case.

2 Shtroborez Interskol PD-230 / 2600E

INTERSKOL presents a professional wall chaser made on the basis of an angle grinder with a modified gearbox. The design makes it easy and quick to make grooves, rollers on the casing allow you to drive the machine over the surface smoothly and confidently. The width of the groove is regulated by spacer washers, and the depth - by the knot for adjusting the overhang of the discs.

1 Wall chaser BOSCH GNF 35 CA

The Bosch GNF 35 CA wall chaser is a professional construction tool with a power of 1400 W and a top speed of 9300 rpm. The system is equipped with two working discs with a diameter of 15 cm and a fit of 22.2 mm. The equipment is capable of sawing surfaces with a width of 7-39 mm and a depth of up to 3.5 cm. The design is complemented by a dense protective casing, double insulation and a reliable spindle lock. The unit operates at a noise level of 113 dB, weighs 4.7 kg and measures 34.6 × 31.6 cm.
The Bosch GNF 35 CA allows you to independently select the desired cutting width and use the depth gauge. The device is supplemented with a soft start function and the ability to connect a construction vacuum cleaner. The tool guarantees stable operation of revolutions under heavy load, and is also complemented by protection against accidental starting and overloading of the motor. The equipment is supplied in a carrying case with three 4 mm spacers, four 6 mm washers, clamping and open-end wrenches, and a support flange.