Top 7 inverters for plasma cutting

Recently, plasma cutters have been used in private homes, workshops and garages. The advantage of this method of cutting metal is speed and high quality of the cut. With the help of hot plasma, you can work with different metals, from stainless steel to non-ferrous alloys. Unlike a grinder, a plasma cutter allows you to make curly cuts without additional finishing.

Inverter rating

7 Inverter air plasma cutting machine CUT-45i

Installation of air-plasma cutting 220V OMAX CUT-45i is used for cutting various types of metals: copper, aluminum, carbon steel. Due to its low weight and compact size, the product can be used in a workshop or small workshop.
The maximum steel thickness of 12 mm provides a wide range of works. There is a built-in moisture separator that extends component life and improves performance. It is necessary to connect the compressor for full functioning.

6 Inverter for plasma cutting START Start Shark X40

Installation of air plasma cutting START SHARK x40 - Compact source for air plasma cutting of metals, combines high cutting speed in combination with good quality and affordable price.

5 Inverter for plasma cutting Aurora AIRHOLD 45

AIRHOLD 45 is designed for plasma cutting of all conductive materials: mild steels, stainless steels, galvanized steels, aluminum, copper and various alloys. The operation of this machine is of high quality and high cutting speed. With a source weight of only 9kg, the maximum thickness of the dividing cut of structural steel sheet is 12mm, and the maximum thickness of the cut of small structures and reinforcement reaches 16mm! AIRHOLD 45 is powered from a conventional 220V network, which makes it possible to work with this device almost everywhere. A compressor must also be connected to the inverter to supply compressed air.

4 Inverter for plasma cutting RESANTA IPR-40

Resant's IPR 40 inverter plasma cutter is designed for high-quality cutting of sheet metal with minimal deformation. Smooth adjustment of the welding current allows you to precisely set the required operating mode. Automatic arc striking system at 5 second intervals. A pressure gauge is provided on the front panel, which allows visual control of operating parameters. The torch requires a connection to a compressed air source.

3 Inverter for plasma cutting Svarog REAL CUT 45 (L207)

A budgetary and practical device from the Svarog company, REAL CUT 45 (L207), is designed for high-quality and fast plasma cutting of metals. Combines a high level of reliability and excellent edge quality after cutting. Modern element base, high-frequency arc excitation, the ability to cut metals up to 12 mm thick, high PV and efficiency are the main features of the available device.High stability of the torch with surges in household voltage, power supply from the 220V network and small dimensions, allow the use of REAL CUT 45 (L207) in any place where it is required to cut metal and there is access to the mains. This model will be an excellent solution for everyday tasks, for work in workshops, on construction sites and for repair services.

2 Inverter for plasma cutting Aurora Jet 40

Plasma cutting machine AURORA Jet 40 is used to work with various conductive materials: carbon steel, stainless and galvanized steel, aluminum, copper, etc. Jet 40 will help to cut metal at high speed and high cut quality. High-frequency arc striking ensures a smooth and high-quality start. One of the main features of this machine is the post-cut airflow adjustment up to 20 seconds.

1 Inverter for plasma cutting ELECTROLITE CUT-40 (Thickness 1-12mm)

The ELECTROLITE CUT-40 inverter plasma cutting machine is designed for plasma cutting of any conductive materials: mild steel, stainless steel, galvanized steel, aluminum, copper and various alloys. The operation of this machine is of high quality and high cutting speed. With a source weight of only 9 kg, the maximum thickness of the dividing cut of structural steel sheet is 12 mm. Plasma cutter CUT 40 is powered from a conventional 220V network, which makes it possible to work with this device almost everywhere. A compressor must also be connected to the inverter to supply compressed air.