Top 5 best engine preheaters, characteristics

The main percentage of engine wear occurs during the winter period. At this time, the motor must be thoroughly warmed up before starting the movement - this allows you to ensure maximum driving comfort. The engine at low temperatures begins to consume more fuel, which is very expensive today.

Most motorists, instead of the usual warm-up of the engine, switched to the use of special equipment - an engine heater. Such a device allows you to effectively warm up the motor, significantly reduce the degree of wear and tear and prevent premature failure.

Rating of the best pre-heaters

5 Engine heater Airline Whirlwind-500 AE-PP-500

The engine preheater is housed in a robust aluminum housing. A built-in, high-power electric heater heats the coolant in the vehicle's cooling system, while a reliable brushless wet armature pump circulates the fluid through the system. This allows the engine to warm up quickly and evenly in any frost. Built-in double overheating protection increases the reliability of the device. The absence of oil seals in the pump design increases the durability of the heater.

Briefly about the product

Vehicle type: cars
Type: engine heater
Heater type: electric
Heating type: liquid
Supply voltage: 220 V
Power consumption 500 W

4 Engine heater Teplostar 14TS-10 -24V

The Teplostar 14TC-10 control unit controls the coolant temperature and, depending on its temperature, selects the heater operation modes: “full”, “medium” or “small”. In the “full” mode according to the “prestart” program, the coolant heats up to 70 ° C, according to the “economical” program - up to 55 ° C, and when heated above 70 ° C or 55 ° C, respectively, it switches to the “medium” mode. In the “medium” mode according to the “prestarting” or “economical” programs, the coolant heats up to a temperature of 75 ° C, and when it is heated above 75 ° C, Teplostar 14TC-10 goes into the “small” mode. In the “low” mode, the coolant heats up to 80 ° C (in both programs), and when it heats up over 80 ° C, it goes into cooling mode, while the combustion process stops, the pump continues to work and the car interior is heated. When the liquid is cooled below 55 ° C according to the "prestarting" program, the heater is automatically switched on again to the "full" mode, and according to the "economical" program - to the "medium" mode.

Briefly about the product

Vehicle type: trucks
Type: engine heater
Heater type: autonomous
Heating type: liquid
Fuel type: diesel
Supply voltage: 24 V

3 Engine heater Start Start-M

Electric heater "Start-M" is designed for pre-heating and heating of engines of passenger cars and medium-duty trucks of domestic and foreign production in the winter period of operation.

Briefly about the product

Vehicle type: trucks, cars
Type: engine heater
Heater type: electric
Supply voltage: 220 V

2 Engine heater Airline Whirlwind-1000 AE-PP-1000

Briefly about the product

Vehicle type: cars
Type: engine heater
Heater type: electric
Heating type: liquid
Heating capacity 1000 W
Supply voltage: 220 V

1 Engine heater Severs PBN2.0 (M2)

"Severs-M" - heaters with natural circulation tested by time, people, cars and severe winters. Warming up takes approximately 1–1.5 hours, depending on temperature and engine size. The liquid moves through the cooling system as it heats up in a natural way - the warm one rises up, the cold one takes its place in the heater and also warms up. The convenience of such a heater is that more than 120 assembly kits have been developed for it for specific car models. Buying Severs-M, you get a set of all the parts necessary for installation that do not require modification. You can easily install Severs-M yourself in just a few hours or contact a service station.
Developed models "Severs-M" with a capacity of 1; 1.5; 2 and 3 kW, which are designed for various cars - from small cars to trucks.

Briefly about the product

Vehicle type: trucks
Type: engine heater
Heater type: electric
Heating capacity 2000 W
Supply voltage: 220 V