TOP-15 best pumps for wells and which one to choose for water with sand: rating of 2019-2020 models for reliability and customer reviews
For many rural residents, the well is the only source of clean water.
For its extraction, you will need a high-quality efficient pump, which will provide all the water points in the house with good pressure.
Submersible pumps are designed to pump water from deep sources such as wells or boreholes.
How to choose and what to look for?
When choosing a pump for a well, you should pay attention to the following criteria:
- Performance... The pump for the well must cover at least 50% of the total water consumption in the water supply system and at the same time not exceed the flow rate of the well (so that it does not suck water out of the well faster than it is collected there). The well flow rate can be viewed in the installation certificate.
- Maximum immersion depth... This refers to the depth of immersion under water, and not generally into the well. For example, if a well with a total depth of 50 m, but 20 m from the surface to the water surface, then there is 30 m of water space, and if you want to lower the unit almost to the very bottom, then its maximum immersion depth should be at least 30 m.
- Power cord length... The power cord must be at least as long as the total depth of the well (if lowered to the very bottom) plus the distance to the outlet.
TOP-15 best models rating
The best pumps for wells up to 20 meters
UNIPUMP MINI ECO-2 (550 W)
Submersible borehole pump UNIPUMP MINI ECO-2 (550 W) is used for autonomous water supply of country houses, for organizing watering of gardens and vegetable gardens, small farms.
The pump body is made of stainless steel, the impellers are made of wear-resistant polycarbonate.
"Floating" impellers guarantee a long service life of the hydraulic part and reduce the likelihood of it jamming when pumping liquids with mechanical impurities.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 3 m³ / h;
- maximum head - 65 m;
- immersion depth - 20 m;
- vertical installation.
Dignity:
- performance;
- low noise level;
- water pressure.
Disadvantages:
- not specified by users.
VORTEX CH-60 (800 W)
Borehole pump VORTEX SN-60 (800 W) is used for pumping clean and slightly contaminated water... Designed to supply water to the house and garden area.
Stainless steel body, chrome plated pump end.
800 W motor allows pumping up to 3000 l / h... The rugged housing can easily withstand heavy use.
The thermal relay reliably protects the motor from possible overheating.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 3 m³ / h;
- maximum head - 60 m;
- immersion depth - 50 m;
- vertical installation.
Dignity:
- water pressure;
- performance;
- low noise level.
disadvantages:
- short wire.
JILEX Water cannon PROF 55/50 (600 W)
Pump JILEKS Vodomet PROF 55/50 (600 W) is intended for supplying clean water from wells, reservoirs and open reservoirs, which is used for watering a garden.
The operation of the device is automatically controlled by the liquid level, due to the fact that it is equipped with a float switch.
For full automation of the water supply system at home, you must purchase the corresponding parts separately.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 3.3 m³ / h;
- maximum head - 50 m;
- immersion depth - 30 m;
- vertical installation.
Dignity:
- water pressure;
- performance;
- low noise level.
Disadvantages:
- poor build quality.
DZHILEKS Water cannon PROF 40/50 (520 W)
Pump JILEKS Vodomet PROF 40/50 (520 W) has a capacity of 2.4 m3 and a water pressure of 50 meters, the diameter of the device body is 98 mm.
The equipment is used for wells with low flow rates. Designed for pumping clean water from wells, wells, reservoirs and open reservoirs.
Pump operation is manually controlled.
The motor thermal relay protects the equipment in case of emergency operation.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 2.4 m³ / h;
- maximum head - 50 m;
- immersion depth - 30 m;
- vertical installation;
- weight - 8.5 kg.
Dignity:
- low noise level;
- performance;
- light weight.
Disadvantages:
- not marked by buyers.
VORTEX CH-60V (370 W)
The submersible pump VORTEX SN-60V (370 W) is used to supply water from wells, wells, reservoirs and open reservoirs for domestic needs, watering plants.
In terms of the degree of protection against electric shock, the pump belongs to the equipment of the IPX8 class and can function fully submerged in water to a depth of 35 meters.
In this case, the distance from the bottom of the well to the tool should not be less than 0.6 meters.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 1.5 m³ / h;
- maximum head - 60 m;
- immersion depth - 35 m;
- vertical installation;
- weight - 10 kg.
Dignity:
- performance;
- water pressure;
- long wire.
disadvantages:
- high noise level.
The best pumps for wells up to 50 meters
VORTEX CH-135 (1800 W)
Borehole pump VORTEX SN-135 (1800 W) is a high-performance device for supplying water from wells... It is characterized by the ability to lift a large amount of liquid from a depth of 60 meters.
The stainless steel housing ensures a long pump life.
Pumping contaminated liquid is not allowed. The distance to the bottom should not be less than 0.6 m.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 5.7 m³ / h;
- maximum head - 135 m;
- immersion depth - 60 m;
- vertical installation.
Dignity:
- build quality;
- water pressure;
- performance.
disadvantages:
- not allocated by users.
BELAMOS TF3-60 (800 W)
Submersible pump BELAMOS TF3-60 (800 W) is used to supply clean water located in a well at a depth of 80 m.
The presented model is indispensable for any owner of a summer cottage or a country house in which there is no centralized water supply.
Wrapped in a robust stainless steel case, the device has a clever design, which includes a special blade shape for a stable water pressure regardless of its flow rate.
This pump is ready to provide a rise of water to a height of 60 m under optimal operating conditions.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 2.7 m³ / h;
- maximum head - 60 m;
- immersion depth - 80 m;
- vertical installation.
Dignity:
- performance;
- water pressure;
- build quality.
Disadvantages:
- short wire.
BELAMOS TF3-80 (1000 W)
Submersible pump BELAMOS TF3-80 (1000 W) is designed to supply clean water from great depths... It is used to work in automated water supply systems for summer cottages, private houses, farms, etc.
Built-in non-return valve with stainless steel spring.
A large number of pump stages and a special material and shape of the blades provide a stable head in a wide range of liquid consumption.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 2.7 m³ / h;
- maximum head - 85 m;
- immersion depth - 80 m;
- vertical installation.
Dignity:
- performance;
- water pressure;
- low noise level.
disadvantages:
- not discovered by users.
Aquario ASP 1E-30-90 (450W)
The borehole pump Aquario ASP 1E-30-90 (450 W) is used to pump clean water from wells and wells... It is used in private automated water supply systems for irrigation, irrigation and other household needs.
Installation of a submersible multistage pump will allow organizing a system for supplying fluid from a well or other water source with a diameter of more than 10 cm.
The equipment is quite simple to install and connect to the water supply system, its installation and connection will take no more than 30 minutes.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 2.82 m³ / h;
- maximum head - 33 m;
- immersion depth - 50 m;
- vertical installation.
Dignity:
- low noise level;
- performance;
- ease of installation.
Disadvantages:
- poor build quality.
VORTEX CH-50 (750 W)
The reliable pump VORTEX CH-50 (750 W) allows lifting large amounts of water from great depths... The equipment is specially designed for pumping liquid for various purposes from narrow openings (wells or wells).
The device is not designed for contaminated water.
The pump has an elongated cylindrical shape and looks like a sleeve. The body is made of durable stainless steel.
The device takes water from the top.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 2.4 m³ / h;
- maximum head - 50 m;
- immersion depth - 60 m;
- vertical installation;
- weight - 13.3 kg.
Dignity:
- low noise level;
- water pressure;
- build quality.
Disadvantages:
- short wire.
The best pumps for wells from 70 meters
BELAMOS TF-100 (1300 W)
Borehole pump BELAMOS TF-100 (1300 W) is used to organize autonomous water supply in private houses and watering plants, as well as in agriculture to create irrigation systems.
The 1300 W electric motor is designed for intensive work with increased loads and provides a capacity of 4500 liters per hour.
Thermal relay protects the device from overheating.
The pumping part is made of high quality stainless steel.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 5 m³ / h;
- maximum head - 100 m;
- immersion depth - 80 m;
- vertical installation;
- weight - 22.1 kg.
Dignity:
- performance;
- water pressure;
- build quality.
Disadvantages:
- not specified by buyers.
Grundfos SQ 3-105 (2540 W)
The borehole pump Grundfos SQ 3-105 (2540 W) is designed for water supply of private houses, pumping water from reservoirs, irrigation hydraulic systems and small waterworks.
The single-phase permanent magnet electric motor is capable of delivering high efficiency over a wide power range.
The electric motor is equipped with a removable cable connector.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 4.2 m³ / h;
- maximum head - 147 m;
- horizontal and vertical installation;
- weight - 6.5 kg.
Dignity:
- performance;
- water pressure;
- low noise level.
disadvantages:
- not marked by buyers.
BELAMOS TF3-40 (550 W)
Submersible pump BELAMOS TF3-40 (550 W) is used for pumping clean water from great depths into the house or for watering plants.
The design of the pumping part allows for self-service (cleaning) of the pumping part, without going to a workshop.
To disassemble the pumping part, it is enough to unscrew the upper cover or the lower flange of the pumping part..
The device is completed with a cable, a plug with an earthing contact.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 2.7 m³ / h;
- maximum head - 42 m;
- immersion depth - 80 m;
- vertical installation;
- weight - 9.4 kg.
Dignity:
- performance;
- build quality;
- water pressure.
Disadvantages:
- not identified by users.
Aquarius BTsPE 0.5-100U
The submersible pump Aquarius BTsPE 0.5-100U consists of a single-phase electric motor and a multistage pumping part, created in the form of a monoblock, as well as a remote condensate box, which is fixed to the power cord with a plug.
The electric pump has a thermal relay that effectively protects it during emergency operation.
The volumetric flow rate of a submersible pump depends on many factors - the depth of the water, the length and diameter of the hose being operated, etc.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 3.6 m³ / h;
- maximum head - 150 m;
- immersion depth - 100 m;
- vertical installation;
- weight - 25 kg.
Dignity:
- performance;
- water pressure;
- build quality.
disadvantages:
- not specified by users.
UNIPUMP ECO MIDI-2 (550 W)
The borehole pump UNIPUMP ECO MIDI-2 (550 W) is used to supply water from sources with a diameter of at least 98 mm.
By means of a submersible pump, an automated water supply system can be organized at a summer cottage, in a country house, in production, etc.
The floating wheels are made of wear-resistant carbonate.
They minimize the risk that the pump will jam when pumping liquids with mechanical impurities..
A special filter prevents large abrasive particles from entering the pump section.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 3 m³ / h;
- maximum head - 73 m;
- immersion depth - 100 m;
- vertical installation.
Dignity:
- water pressure;
- low noise level;
- performance.
disadvantages:
- not discovered by users.
Customer Reviews
The borehole pump BELAMOS TF3-40 (550 W) is almost silent. Compared to vibration, it is much quieter. It is relatively small in size. Excellent construction. Good steel. Really does not rust. Sometimes clay gets caught. But the pressure keeps.
The downhole pump JILEKS Vodomet PROF 55/50 (600 W) is easily installed on wells and shallow wells. The body is made of high-quality stainless steel, inside there are impellers made of high-strength plastic. Low vibration, quiet operation. The weight allows the use of a plastic head on wells.
The downhole pump VIKHR CH-50 (750 W) was installed at a summer cottage for a well. There are special rings for fastening the cable, for lowering and lifting. There is a thermal relay against overheating. We got clogged with sand a couple of times, a protective device was triggered, cleaned and works again.
