Top 10 motor-drills: characteristics

The motor-drill is a relatively simple and safe unit to use. It allows you to make holes of different depths in the ground for fences, pillars, or make holes for planting. Some anglers take with them on ice fishing to break through the ice. Today, hundreds of models are available in hardware and home appliance stores.

Rating of motor-drills

10 Motor-drill PATRIOT AE 70 D 3.5 HP

Motor-drill Patriot AE70D, equipped with a two-stroke 3.5 hp engine. (equivalent to 2500 W), refers to professional grade equipment. It is worth noting the high level of reliability of the motor, which has a long service life. The device is used for drilling wells not only in the ground, but also in the ice. The motor-drill is not equipped with a drill: you can choose it yourself, based on your needs, due to production needs. It is allowed to install a drill with a diameter of up to 350 mm inclusive.
The Patriot AE70D motor-drill uses gasoline as fuel. The volume of the fuel tank is 1.3 liters. An important function of the motor-drill from the point of view of ensuring safety is the blocking of accidental start-up. The convenience of operating the device is facilitated by the presence of rubberized handles, which are convenient to use both with and without gloves. In addition to the operation manual, which is distinguished by its detail, a spark plug wrench is included in the delivery set of the motor drill.

9 Motor-drill Hammer MTB80 2.5 HP

The HAMMER FLEX MTB80 motor-drill is a semi-professional tool with a 2.45 hp engine. Suitable for drilling holes for planting or setting up a fence and ice for ice fishing.

Peculiarities:
Reliable engine
Use a primer to pump fuel into the carburetor. So you can easily start the drill even in freezing temperatures.
A dual air filter protects the engine from clogging and premature wear.
Sophisticated design
The gear reducer is angled to reduce the noise level.
Plastic handles with non-slip pads - you have a firm grip on the tool, it does not slip out of your hands.
The controls are collected in one place. You don't have to search for the right button for a long time.
Comfortable work
The motor is secured by screws with rubber gaskets. This reduces vibration, hands get tired less.
Screws of different diameters are suitable for work: from 80 to 250 mm. Select equipment depending on the type of work.

8 Motor-drill Huter GGD-52 1.9 HP

The HUTER GGD-52 motor-drill belongs to the group of light class tools and is suitable for one operator. Equipped with a two-stroke engine, the model can drill holes in both ice and soil, depending on the type of auger installed. The largest auger diameter that you can use with this motor drill is 300 mm. The maximum drilling depth for ice or soil is 180 cm.
The gasoline engine used in the HUTER GGD-52 motor-drill is a two-stroke and is characterized by a power of 1400 W (1.9 HP). The fuel source for it is a gas tank that can hold up to 1.2 liters of a two-stroke fuel mixture. Thanks to the primer for pumping fuel, the engine of the gasoline tool starts confidently even at low temperatures. With a weight of 6.8 kg, the motor-drill has rubberized handles / pads, a blocking of accidental activation.

7 Motor-drill Fubag FPB 52 2.5 hp

A simple and reliable tool for drilling a variety of soil and ice. Motor-drill FPB 52 is actively used in construction and economic activities and allows you to make a well with high quality and in a short time.

6 Motor-drill CALIBER BS-1650 2.2 h.p.

With the use of the motor-drill Caliber BS-1650, drilling of soil and ice is carried out. This equipment is suitable for various types of soil, differing in density and other characteristics. Plants are planted in the prepared holes or posts are installed for the installation of enclosing structures.
Motobur Caliber BS-1650 belongs to the light class. Thanks to this, one operator can work with the equipment, there is no need to involve other people as assistants. This device belongs to the professional category. It is designed for increased loads and active use, very reliable and will serve you for a long time.
The motor-drill is equipped with a two-stroke internal combustion engine with a capacity of 2200 W. The volume of this unit is 51.7 cm3. The fuel used for the equipment is gasoline, which can be bought without any problems at the nearest gas station.
Fuel is poured into a tank with a capacity of 1.2 liters. This is enough for long-term use of the equipment; there is no need to frequently refuel during operation. The maximum diameter of the auger to be installed is 250 mm, it must be purchased separately. Drilling takes place to a depth of 80 cm.

5 Motor-drill CHAMPION AG243 1.7 HP

The Champion motor drill is designed for drilling holes in soil and ice. It is intended for use in agriculture, in utilities, in a summer cottage or a personal plot during construction work. Can be used for fishing. Fuel pump for easy starting in difficult climates. The housing material is resistant to low temperatures. Quick Start system for easy starting. Replaceable augers for drilling soil and ice. Reliable coaxial gearbox type.

4 Motor-drill Carver AG-62/000 3 h.p.

Motor-drill Carver AG-62/000 easily copes with making holes in ice and soil. The tool can be used in the most difficult climatic conditions. Drilling depth with its use can reach 1 m. The two-stroke engine of the tool has a power of 2200 watts. It is capable of up to 7500 rpm. The motor-drill Carver AG-62/000 is powered by gasoline. It is equipped with a lock against accidental activation. All characteristics of a motor drill indicate that it belongs to professional tools.

3 Motor-drill ELITECH BM 64V Promo 3 h.p.

Gasoline motor-drill BM 64V Promo with a two-stroke air-cooled engine is designed for drilling soil and ice with an auger with a diameter of 40 mm to 200 mm to a depth of 1.8 meters. The augers for different types of soil differ in the cutting head. The auger is not included in the complete set of the motor drill.

2 Motor-drill RedVerg RD-EA490 2.2 HP

Motor-drill RedVerg RD-EA490 is not equipped with a drill: this accessory is purchased separately.Drills with a diameter of up to 200 mm can be used. The model used for drilling holes in soil and ice is suitable for private and semi-professional use. The tool is self-contained and can be used wherever needed, regardless of network connectivity. The fact is that the motor-drill is powered by a two-stroke engine, the working volume of which is 49 cm³. Gasoline is used as fuel. The volume of the fuel tank, equal to 1.3 l, is sufficient to ensure a significant duration of the operation of the motor-drill, a distinctive feature of which is low fuel consumption.
The RedVerg RD-EA490 motor-drill is compact and lightweight. The motor-drill can be easily carried from place to place. The delivery set includes a set of necessary tools. The motor-drill is packed in a box with an attractive appearance.

1 Motobur ZUBR MB2-250 2.5 HP

Motobur Zubr MB2-250 is a versatile tool used for drilling holes in frozen, hard or soft ground, necessary for the subsequent installation of posts or fences. The special design of the handle allows two or one operator to operate the device. The operation of the Zubr MB2-250 motor-drill is based on a two-stroke engine with a power of 1800 W (2.45 hp) and a volume of 52 cm³. With this model, a drill with a diameter of up to 250 mm can be used, which during the operation of the device develops a rotation speed of up to 8800 rpm. The fuel is a mixture of gasoline and oil, which is poured into a 1-liter fuel tank. The motor-drill weighing 10 kg has a width and height equal to 540 mm and 375 mm, respectively.