TOP 10 best vibration pumps: review, selection rules, reviews
Vibrating pumps are the most utilitarian mechanisms that are distinguished by an optimal ratio of price, quality and performance. Therefore, they are very popular among the whole variety of submersible pumps. The vibrating pump is suitable for wells up to 80 meters deep. This review will help you choose the best device with technical characteristics, pros and cons of models of domestic and foreign production.
How to choose a vibration pump
When buying a vibration pump, you should pay special attention to:
- Suction depth - the parameter varies from 3 to 60 meters in depth. It all depends on the goals and operating conditions: for pumping water from the basement, it is suitable up to 3 meters, and for a well, a well - from 10 to 60 meters.
- Delivery head - for most models it ranges from 15 to 75 meters. When the pump is used for irrigation, this figure is not very important. If the water is pumped to a hill in a container, then it is imperative to take into account the height difference.
- Power - standard indicators from 200 to 280 W. The more efficient the device, the easier it can withstand continuous load.
- Performance - such pumps can pump from 0.9 m³ to 1.6 m³ per hour. If a pump is needed for servicing the pool, draining the basement, then it is worth choosing a device with high values.
- Power cable length - equal to 10-40 meters. Here you need to look at the remoteness of the location of the electrical outlet.
- Suction valve location - can be bottom and top. It is recommended to take with an overhead location so that the pump does not suck in the sludge.
- Working position - vertical or horizontal. More often, devices provide for a vertical position, but there are mechanisms that lie on one side.
- The weight - is from 3 to 6 kg. The lightweight vibration pump is much easier to raise and lower.
- Protective functions - for example, protection against dry running when the hose is kinked or against overheating of the winding.
Best Vibrating Pumps
The presented models have an official warranty of one year or more. The pump body is fully or partially made of metal, which guarantees a long service life and resistance to mechanical damage. The capacity of 1 m³ per hour is quite enough for household needs such as providing water at home or watering plants in a personal plot.
Vortex VN 10N
A vibrating pump with a lower intake of water for domestic purposes is used to supply clean water, including drinking water. The depth of a well, a well, a reservoir can reach 72 m and more. Such a device can supply water to horizontal distances of more than 100 m, which allows pumping liquid from distant water sources. The body of the device is made of metal, resistant to mechanical damage, which guarantees a long service life.
| Characteristic | Meaning |
| Inner diameter | 100 mm |
| Performance | 18 l / min |
| The weight | 3.5 kg |
Pros:
- high power - 280 W;
- aluminium case;
- ten-meter power cord;
- the presence of thermal protection;
- raises water to a height of 72 meters.
Minuses:
- no protection against dry running;
- the metal body is susceptible to corrosion.
Review: “It works quietly! I was very pleased that he had a noble quiet sound! It justifies its declared 18 l / m (checked with two buckets and a stopwatch). "
Livgidromash Malysh BV 0.12 40 U5 10 m
The household vibration pump is designed to supply water from mine wells, wells with an inner diameter of more than 100 mm. It is suitable for irrigating house plots, gardens, orchards. The supplied water must not contain aggressive or mechanical impurities. The 240 W pump with bottom water intake can pump liquid horizontally over a distance of more than one hundred meters.The domestic manufacturer provides a year of warranty for this equipment.
| Characteristic | Meaning |
| Inner diameter | 99 mm |
| Performance | 1.5 m³ / h |
| The weight | 3.4 kg |
Pros:
- powerful motor;
- does not require lubrication;
- durable body;
- lifts water from a depth of 40 meters;
- complies with safety standards.
Minuses:
- thermal protection function is optional;
- when drawing water from the bottom hole, small debris can be pulled.
Review: “We recently dug a well. The pump was bought by the workers themselves. The depth is about 8-9 meters. Small bucket gains in 30 seconds. Noisy, but not critical. "
Aquarius-3 BV-0.12-40
An electric submersible pump of domestic production with a powerful motor (256 W) is an excellent assistant in a farm, horticultural or household. Raises clean water from wells and boreholes up to forty meters deep. The vibrating pump with bottom water intake is equipped with a three-core wire with the possibility of grounding. The length of the power cable is 40 meters, which eliminates the need for additional carriers. The pumping parts are made of natural rubber, which guarantees their reliability and long service life.
| Characteristic | Meaning |
| Inner diameter | Not less than 100 mm |
| Performance | Up to 1000 l / h |
| The weight | 8 Kg |
Pros:
- the presence of built-in thermal protection;
- high quality materials for components;
- bottom location of the suction valve;
- there is a nozzle for irrigation as standard;
- the immersion depth is 60 meters.
Minuses:
- rather heavy weight;
- combined body - metal + plastic.
Testimonial: "The pump" Aquarius "is an excellent find for household use, pumping wells, watering a summer cottage. The price and quality of the goods are favorable. Convenience and ease of use. "
Dzhileks Poplar Malysh M-40m 1kl
A vibration pump with an upper water intake and a forty-meter power cable from the mains is intended for wells, water tanks, open reservoirs, wells, garden and vegetable garden irrigation. The flow path is made of metal. The first class of protection against electric shocks and voltage surges. The connected hoses must be flexible, rubber or plastic with an inner diameter of 18 to 22 mm. This model is durable and easy to use.
| Characteristic | Meaning |
| Inner diameter | More than 110 mm |
| Performance | 1.5 m³ / h |
| The weight | No more than 3.4 kg |
Pros:
- high motor power - 240 W;
- there is a grounding conductor;
- can be operated in vertical and horizontal position;
- the service life is on average 2.5 years;
- inexpensive.
Minuses:
- do not pump contaminated water;
- loud noise.
Review: “I was looking for such a pump for a dacha for a long time, I bought it for a well, so the power and length of the cord suited me very much. Delivered within 24 hours, which is very good, packed perfectly, even a dull one will understand the operation. "
Sibrtech SVN300-10
The 300 W motor is capable of pumping large volumes of clean water (the size of filtered solids up to 1 mm). The aluminum body is not subject to mechanical damage and is lightweight. The product package includes a cable for submerging the pump to a depth of 5 meters and a clamp for fixing the hose. The power cord is only 10 meters long. Due to the upper water intake, the accumulated debris does not get inside the pump.
| Characteristic | Meaning |
| Inner diameter | More than 100 mm |
| Performance | 1200 l / h |
| The weight | 3.2 kg |
Pros:
- low cost;
- immersion depth more than 3 meters;
- durable metal body;
- high performance of the motor;
- one year manufacturer's warranty.
Minuses:
- short length of the power cable;
- the presence of an RCD to protect against voltage surges in the network is required.
Stavr NPV-300V
A vibrating pump for a well with a 300 W motor is capable of lifting water 70 meters in height, which is important for uneven terrain. The aluminum housing has a long service life and does not corrode.The manufacturer provides a durable nylon diving cable, rubber piston, valve collar and hose clamp. There is an automatic motor protection against overheating, which greatly simplifies operation.
| Characteristic | Meaning |
| Inner diameter | 125 mm |
| Performance | 18 l / min |
| The weight | 3.2 kg |
Pros:
- extended warranty obligations up to 3 years;
- the size of the passed solid particles reaches 5 mm;
- is completed with a 10-meter submersible cable;
- good pressure;
- built-in overheating protection.
Minuses:
- have complaints about the power cord;
- cannot be installed horizontally.
Review: “Ideal for a summer residence. The neighbor advised. It pumps perfectly, watering is no longer a problem. I liked the powerful pressure. This is an important advantage since the well is deep. The pump casing itself does not rust. "
Unipump Bavlenets BV 0.12-40-U5
The vibrating pump with a bottom water intake of the Bavlenets series is used to supply liquids without sand or debris from wells, wells, various reservoirs, open reservoirs. The equipment operates from a 220 V alternating current network or solar, gasoline-electric generators. Can be used to organize individual water supply systems, pumping tanks. Due to its high safety standards, it is suitable for drinking water supply.
| Characteristic | Meaning |
| Inner diameter | Not less than 100 mm |
| Performance | 1600 l / h |
| The weight | 3.5 kg |
Pros:
- high protection class - IPX8;
- forty-meter power cord;
- pumps out water to a minimum level;
- can operate from a generator with a capacity of more than 0.5 kW;
- works non-stop for 2 hours, then a break for 20 minutes.
Minuses:
- immersion depth 3 meters;
- flimsy diving rope.
Review: “The pump is the best of its kind. Highest productivity up to 1600 l / h, rubber elements made of natural rubber. "
Olsa Brook-1, 10m
A submersible well pump with a 225 W motor, an upper water intake and a ten-meter power cable is perfect for small backyards and farms. The maximum head reaches 60 meters in height, respectively, it can be immersed to a depth of 60 meters. There is an automatic overheating protection. The absence of rubbing and rotating parts ensures long-term and trouble-free operation. Water, passing through an electromagnetic drive, is magnetized and becomes even more useful for watering the garden and vegetable garden.
| Characteristic | Meaning |
| Inner diameter | Up to 99 mm |
| Performance | 1.05 m³ / hour |
| The weight | 3.6KG |
Pros:
- ease of use;
- good performance indicators;
- no restrictions on diving depth;
- noise and vibration at an average level;
- made according to GOST.
Minuses:
- unreliable bolt fastening;
- fasteners rust.
Review: “The pump is good, but weak. It is clear that they make it for all reservoirs and for wells from 75 to 99 mm in diameter. Simple, cheap, unpretentious, worked for 3 years without getting out of the well. It's worth its money. "
Bison ZNVP-300-10_M2
The efficient and reliable Zubr pump has a simple design and requires no maintenance. A large head (up to 60 m) allows you to raise water from a well or well even into a two-story house. Thanks to the design features, the 300 W motor consumes 25% less electricity than comparable models. Operational safety is guaranteed by a three-core wire, and the copper wire in the winding increases the service life of the motor. The pump resource is at least 200 hours of continuous operation, while other models have only 100 hours.
| Characteristic | Meaning |
| Inner diameter | – |
| Performance | 24 l / min |
| The weight | 3.7 kg |
Pros:
- five-year manufacturer's warranty;
- all electrical elements are fully waterproofed;
- the presence of a built-in check valve prevents water from draining;
- the water intake connection is located at the top to prevent sediment from entering the pump;
- suspension cord included.
Minush:
- no clamp included;
- thin rope for hanging.
Review: “I pumped a 200 liter barrel in a little less than 15 minutes, from a well to a 35 m barrel, without climbing (3/4 hose).Cable 0.5 square, in my opinion is not enough, you need at least 1 square. On the whole, it’s a good unit, it pumps well ”.
PATRIOT VP-10
This vibration pump is designed to lift water from wells and boreholes up to 10-15 meters deep to a height of up to 60 meters. Simple installation can be done by yourself, just like maintenance. Built-in thermal protection sensor and double insulation of live elements ensure safety and durability. A special cable hole facilitates lowering and lifting of the pump. The power cable with a Euro plug is durable and flexible.
| Characteristic | Meaning |
| Inner diameter | More than 100 mm |
| Performance | 1080 l / h |
| The weight | 3.25 kg |
Pros:
- permissible temperature of the pumped liquid 40 degrees;
- availability of protection against dry running;
- the thermal relay prevents the pump from overheating;
- aluminum alloy body;
- not afraid of corrosion.
Minuses:
- the connector must be purchased separately;
- 8m power cord.
Review: “It works, it pumps perfectly, the pressure is good. Honestly worked for 3 years from spring to autumn. I bought it to give it to the well. "
Product comparison table
| Product Name | Inner diameter | Performance | The weight |
| Vortex VN 10N | 100 mm | 18 l / min | 3.5 kg |
| Livgidromash Malysh BV 0.12 40 U5 10 m | 99 mm | 1.5 m³ / h | 3.4 kg |
| Aquarius-3 BV-0.12-40 | Not less than 100 mm | Up to 1000 l / h | 8 Kg |
| Dzhileks Poplar Malysh M-40m 1kl | More than 110 mm | 1.5 m³ / h | No more than 3.4 kg |
| Sibrtech SVN300-10 | More than 100 mm | 1200 l / h | 3.2 kg |
| Stavr NPV-300V | 125 mm | 18 l / min | 3.2 kg |
| Unipump Bavlenets BV 0.12-40-U5 | Not less than 100 mm | 1600 l / h | 3.5 kg |
| Olsa Brook-1, 10m | Up to 99 mm | 1.05 m³ / hour | 3.6KG |
| Bison ZNVP-300-10_M2 | – | 24 l / min | 3.7 kg |
| PATRIOT VP-10 | More than 100 mm | 1080 l / h | 3.25 kg |
Before buying a vibrating submersible pump for private use, you should calculate the approximate volume of pumped water in order to select a model with a suitable capacity. The length of the network cable is also important, as well as the possibility of maintenance in the service center. This review-rating and real customer reviews will help you choose the best vibration pump.
