TOP 10 best welding generators: rating of 2020-2021 and how to choose the right device

The welding generator is a copy of a power plant with a built-in welding machine.

The equipment has many advantages, such as mobility, compactness, stability, high efficiency, auto-start function, and so on.

But in order for the generator to meet all the requirements of the buyer, it is necessary to choose it correctly.

The article provides an overview of the best models, which will greatly facilitate the buying process.

How to choose and what to look for?

1. Pay attention to the value of the welding current... Usually indicated in a specific range. The higher the value, the larger the diameter of the electrodes can be used.
2. Welding current type... It can be constant or variable. It is better to give preference to models with direct current. They allow you to achieve a smooth ignition of the electric arc, its stable combustion.
3. For power and output voltage... The higher the power, the more efficient the welding work. If we consider the issue of phase, then three-phase welding generators allow you to connect a large number of single-phase and three-phase users.
4. Decide on the type of fuel... The stations run on gasoline or diesel. The second type of fuel is considered economical. But when choosing, the buyer should start from personal preference.
5. Explore additional features... A good indicator for the model is the presence of a protection system, autorun, fuel economy at minimum loads.

TOP-10 best models rating

Best Welding Generators

Huter DY6500LXW

The gasoline generator is suitable for creating a backup power source, for use in the form of welding equipment.

Powered by a 1-cylinder, 4-stroke Huter 188F piston engine, air-cooled.

The control panel includes a voltmeter, control lights, ignition toggle switches, activation protection and 12 V terminals plus a ground terminal.

The unit is mounted on a steel frame complete with handles and wheels. Operation and maintenance is carried out without special operator skills.

Specifications:

• voltage - 220 V;
• engine power - 15 hp with.;
• tank volume - 22 l;
• active power - 5 kW, max. - 5.5 kW;
• Max. welding current - 200A;
• noise level - 71 dB;
• sockets - 2 x 220 V, 1 x 12 V;
• dimensions - 70x57x53.5 cm;
• weight - 72 kg.

Fubag WS 230 DC ES

Single-phase generator with Fubag GF 460 engine. Presented as a gasoline power plant with built-in welding machine.

The user can carry out arc welding with electrodes with a diameter of 5 mm, while evaluating the high quality of the joint at the joint. The electric starter allows the unit to be started quickly despite the surrounding weather.

The generator additionally has an on-board battery, built-in overload protection, low oil level indicators.

You can use additional options - DX50 grounding cable, electric holder with DX50 cable.

Specifications:

• engine displacement - 458 cubic meters. cm, power - 13.4 liters. with.;
• tank volume - 25 l;
• active power - 5 kW;
• welding current - 50-230 A;
• sockets - 2 x 220 V;
• electrode diameter - from 1.6 to 5 mm;
• dimensions - 73x59x53.5 cm;
• weight - 94 kg.

Fubag WHS 210 DDC

Three-phase, gasoline, direct current (DC) welding generator, professional air-cooled Honda GX 390 engine.

Designed to perform complex tasks in the construction and installation area, in cases of emergency.

Allows connection of rutile electrodes up to 5 mm, as well as a wide range of three-phase and single-phase users.

The unit is located on a reinforced frame that protects it from various negative influences.

Specifications:

• engine displacement - 389 cubic meters. cm, power - 13 liters. with.;
• tank volume - 25 l;
• active power - 5 kW, full - 7 kW;
• current strength - 9.1 A, welding current - 50-210 A;
• sockets - 1 for 220 V, 1 for 380 V;
• dimensions - 73x59x53.5 cm;
• weight - 87 kg.

EUROPOWER EP200X2

Gasoline welding generator based on Huter 188F engine with air cooling system, manual and electric start.

It is actively used in welding, construction and installation works in places with regular power outages.

Operates in two modes - power plant with synchronous alternator, DC welding.

Various electrodes can be connected, but with a diameter of up to 4 mm. This is a single-phase model with several sockets for connecting equipment, appliances, tools.

Specifications:

• engine power - 15 hp with.;
• specific fuel consumption - 374 g / h;
• tank volume - 22 l;
• active power - 5 kW, max. - 5.5 kW;
• Max. current strength - 200 A;
• sockets - 2 x 220 V, 1 x 12 V;
• dimensions - 70x57x53.5 cm;
• weight - 72 kg.

Kronwerk LK 210Е

Gasoline model with synchronous alternator, electric and manual start. Designed to provide users with electricity, as well as to play the role of a full-fledged welding equipment.

The single-phase generator has several key features - protection function against system overload and overheating, AVR, DC, fuel and oil sensor.

The power plant is equipped with wheels for increased mobility, a silencer to reduce noise during operation.

Specifications:

• engine displacement - 420 cubic meters. cm, power - 15 liters. with.;
• fuel consumption - 2.6 l / h;
• tank volume - 25 l;
• protection class - IP23;
• active power - 4.5 kW, max. - 5 kW;
• sockets - 2 x 220 V, 1 x 12 V;
• dimensions - 70x58x54 cm;
• weight - 73 kg.

ТСС SGW-4000 EH

Single-phase gasoline generator with built-in arc welding function. Designed for use in the construction industry, other installation work.

The rated welding current is 190 A, which defines the unit as a professional equipment.

Various electrodes with a diameter of 1.6 to 5 mm are used for welding.

In the role of a power plant, the model showed itself on the positive side: it allows you to connect single-phase users, solves problems with a lack of electricity, is equipped with a voltmeter to assess the operating parameters.

Specifications:

• electric and manual start;
• fuel consumption - 2.4 l / h;
• tank volume - 25 l;
• active power - 4 kW;
• sockets - 1 for 220 V, 1 for 12 V;
• dimensions - 73x59x53 cm;
• weight - 82 kg.

TCC DGW-200ES

This is a single-phase diesel welding generator in a soundproof enclosure. Designed for manual arc welding to create an autonomous power source.

It features a powerful 188F series engine (1 cylinder, 4 strokes) with air cooling.

To perform welding, it is necessary to connect electrodes with a diameter of 1.6 to 4 mm... The power plant also has a built-in AVR system for automatic voltage control.

Starting is carried out by an electric starter, while the injector instantly injects fuel into the system, making it easier to start.

Specifications:

• engine displacement - 456 cubic meters. cm, power - 8.2 liters. with.;
• fuel consumption - 1.9 l / h;
• tank volume - 12.5 l;
• active power - 3 kW, max. - 3.5 kW;
• welding current strength - 50-190 A;
• noise level - 72 dB;
• sockets - 2 x 220 V, 1 x 12 V;
• weight - 145 kg.

TCC DGW-200E

Single-phase, diesel, welding generator based on air-cooled 188F engine. Equipped with an electric starter and manual start of the system.

Acts as an efficient power station for supplying stable current, DC welding structure for welding seams on various metal.

The unit is located on a reinforced frame with wheels.

This makes it easy to move it around the work area, protect it from adverse external factors.

Specifications:

• engine displacement - 456 cubic meters. cm, power - 8.2 liters. with.;
• fuel consumption - 1.9 l / h;
• tank volume - 12.5 l;
• active power - 3 kW, max. - 3.5 kW;
• welding current strength - 50-190 A;
• sockets - 2 x 220 V, 1 x 12 V;
• electrode diameter - 1.6-4 mm;
• weight - 112 kg.

Pramac W 220

Three-phase gasoline welding generator with manual start, air-cooled Honda GX390 engine system.

Able to provide a large number of single-phase and three-phase users with electricity. If you connect the electrodes, you can weld any metals with a neat seam.

The front panel is equipped with a voltmeter, display with operating parameters... Overload protection extends the life of the entire device when used under extreme conditions.

Specifications:

• engine displacement - 389 cubic meters. cm;
• fuel consumption - 2.8 l / h;
• tank volume - 6.1 l;
• active power - 4.5 kW, max. - 4.9 kW;
• sockets - 2 for 220 V, 1 for 380 V;
• dimensions - 87.5x60x62 cm;
• weight - 80 kg.

CALIBER BSEG-5500A

Single-phase gasoline power plant with electric start and manual start of the system, with built-in welding. Developed on the basis of the air-cooled HT190FDE propulsion system.

For welding work, it is enough to choose electrodes with a diameter of 2.5-4.2 mm.

Users note a high-quality, smooth and even weld seam at the junction of metal products... For easy transportation, the manufacturer has provided the generator with large wheels.

Specifications:

• engine power - 14 hp with.;
• fuel consumption - 1.1 l / h;
• tank volume - 25 l;
• active power - 5 kW, max. - 5.5 kW;
• there is a voltmeter;
• welding current strength - 50-190 A.