TOP 10 best storage electric water heaters 50 liters

An electric water heater is a thing in an apartment no less important than a convenient washing machine or a powerful washing vacuum cleaner.

But a water heater is not just heating water, it is also convenience, reasonable economy and independence from utilities and pressure testing periods.

In addition, the modern functionality and features of the inner lining of many tanks make it possible to significantly increase the quality of hot water for the whole family to a level suitable for bathing babies, which has a positive effect on the health and mood of the household.

How to choose a storage water heater?

In terms of functionality and technical parameters, all electric storage water heaters are similar, although some technical nuances still exist.

It is necessary to choose a device precisely according to technical criteria, because the comfortable operation of the device depends on it:

• Energy source... Water heaters can be powered by gas or electricity. Electric boilers are cheaper than gas boilers, they are easier to install, and the user can independently choose the place of installation. Gas appliances are tied to the fuel source and are considered less safe.
• Volume of the tank... This is the main criterion when choosing a water heater, because there should be enough hot water for the whole family. On average, a 50 liter boiler is sufficient for a family of two.
• Power... This characteristic determines how quickly the device heats up the water. But buying a maximum power device is not worth it. Many homes have old aluminum wiring that may simply not be able to withstand such a load, so it is better to choose a device with an average power.
• Type of allocation... According to this criterion, boilers are divided into two types - wall and floor. Water heaters for 50 liters are usually wall-mounted, because in this case it practically does not take up space in the toilet or bathroom.

You should also pay attention to the inner lining of the tank.The product's resistance to sudden temperature changes and corrosion depends on it.

Additional factors

There are a few more points to pay attention to when choosing a water heater.:

• the presence of a magnesium anode, which reduces the formation of scale and prolongs the life of the heater;
• the presence of a drain valve - the function of draining water is extremely necessary in case of equipment downtime or when it is placed in an unheated room;
• the presence of a conveniently located service opening designed to clean the inner surface of the tank from scale and sediment;
• system for connecting to the water supply network - here you should consider the diameters of the outlet hoses and understand how common they are in the region and whether they can be quickly replaced in the event of a rupture;
• pressure valve (bypass) - serves to protect the device from voltage surges, and also preserves the integrity of the tank when water is heated;
• location of heating elements - there are submersible heating elements that are placed directly in the water and require periodic cleaning and replacement, and "dry" heating elements that do not come into contact with water and, accordingly, are more durable in use.

Rating of the best models

Electrolux EWH 50 Quantum Pro

Electrolux EWH 50 Quantum Pro is an electric storage water heater with a rounded shape with a narrow diameter, which is ideal for placement in confined spaces. The enamelled water heater EWH 50 is equipped with one heating element (1500 W). An intuitive control panel with a knob for setting the desired water heating temperature in the range from 30 to 75C is located on the bottom cover of the device. By the way, in ECO mode, the water will only be heated to a temperature of 55C, and the formation of scale will be minimized.Corrosion resistance is provided by multilevel protection of all important structural elements, a fine-dispersed enamel coating of the inner surface of the tank - Protect Tank and an increased mass magnesium anode. The production uses advanced technologies: Temperature control - automatic control and indication of water temperature, Energy Conservation - thanks to them and high-efficiency thermal insulation made of environmentally friendly polyurethane foam, heat losses are reduced.

Main characteristics:

• Dimensions (WxHxD): 38.5 x 70.3 x 38.5
• Power: Power
• Tank coating: enamel
• Heating time to maximum temperature: 96 minutes (75 ° C)
• Mechanical control
• Heating element: submersible heating element
• Protection against switching on without water, against overheating
• There is a check valve
• Main operating modes: normal and economical, the ability to select a temperature value

Zanussi ZWH / S 50 Orfeus DH

Water heater Zanussi ZWH / S 50 Orfeus DH storage type has an internal tank with a volume of 50 liters, the water from which is heated to the set temperature in 162 minutes. The built-in indicator will promptly inform you about the readiness of the device to start working.
The Zanussi ZWH / S 50 Orfeus DH has mechanical switches that let you easily adjust the settings you want. The magnesium anode prevents the formation of corrosive deposits, thereby significantly extending the life of this household assistant. The corresponding indicator will inform about the progress of heating the liquid.

Main characteristics:

• Dimensions (WxHxD): 39 x 72.1 x 43.3
• Power 1.5 kW (220 V)
• Tank coating - enamel
• Heating time to maximum temperature: 162 minutes (75 ° C)
• Mechanical control
• Heating element: dry heating element
• Protection against switching on without water, against overheating. There is a check valve.
• Basic modes of operation: normal and economical, the ability to select a temperature value.
• Equipped with water disinfection function

Electrolux EWH 50 Heatronic DL Slim DryHeat

The EWH 50 Heatronic DL Slim DryHeat is a reliable, electronically controlled water heater. The unique advantage of the water heater is the function of programming three individual heating temperatures. An electronic control panel is located on the lower cover of the water heater. It contains buttons that can be used to set the desired temperature for heating water in the range from 30 to 75 ° C. The system of "DRY" independent heating elements - "X-HEAT" - are two independent "dry" heating elements that do not have direct contact with water. The heating elements are located in special metal casings fixed to the flange in the lower part of the tank, which limits the formation of scale on the heating elements. Independent operation of heating elements allows the water heater to continue working in the event of a malfunction of one of them. That. the "X-Heat" system significantly increases the service life of the water heater.

Main characteristics:

• Dimensions (WxHxD): 34 x 86 x 34
• Power: 1.5 kW (220 V)
• Tank coating - glass ceramics
• Heating time to maximum temperature: 111 minutes (75 ° C)
• Electronic control
• Heating element: dry heating element - 2 pcs.
• Protection against switching on without water, against overheating. There is a safety valve.
• Main operating modes: normal mode, ECO mode, 3 individual water heating temperature settings

Atlantic Vertigo Steatite Essential 50 E

A modern French boiler with the lowest cost of ownership and the lowest cost of ownership of any water heater on our market. Like many other Atlantic models, it is equipped with dry heating elements (there are two of them at once) based on natural steatite material. Such heating elements in Atlantic boilers do not need to be replaced every two 2-4 years, as in typical Chinese boilers.

Heating elements in Atlantic models easily serve for 10 years, and in some cases even up to 20. The magnesium anode also needs to be changed much less often - once every two years, and not once a year, like in Chinese models. Therefore, Atlantic boilers are the most profitable in terms of cost of ownership. It is 5 thousand rubles in 7 years - against 17 thousand rubles for inexpensive Chinese boilers.

Still steatite heating elements make Atlantic boilers the quietest - thanks to their (heating elements) design, the intensity of scale formation is reduced to a minimum, as well as its accumulation on the protective flask in the form of solid limescale. Which after a year and a half appears in cheap Chinese heaters in the form of a fairly hard "crust" on the heating element and significantly increases the noise level.

Finally, Atlantic are the most energy efficient water heaters. "Dry" heating elements Atlantic quickly heat up and slowly cool down. And due to excellent thermal insulation, they effectively keep the water temperature. Therefore, in the end, the boiler spends less electricity both for heating water and maintaining the required temperature. As a result, Atlantic models have the highest 'B' rating on the European ErP energy efficiency classification - among domestic water heaters. Typical Chinese models with "wet" heating elements - at best, "C" (the lower in the alphabet, the worse), which means at least 10% increased power consumption.

Main characteristics:

• Dimensions (WxHxD): 49 x 76 x 31 cm
• Power 2.5 kW (230 V)
• Tank lining - enamelled steel
• Heating time to maximum temperature: 122 minutes (63 ° C)
• Mechanical control
• Functions: indication of inclusion; antibacterial protection; ultra-precise electronic thermostat
• Heating element - two "dry" steatite heating elements
• Protection: from switching on without water, from overheating, from scale. There is a safety valve.

Electrolux EWH 50 Centurio IQ 2.0

Water heater Electrolux EWH 50 Centurio IQ 2.0 with an internal stainless steel tank, it has high-quality thermal insulation (CFC-Free) and the ability to adjust the temperature from 30 to 75 ° C in 1 ° C increments.
Wi-Fi connection via USB connector makes it possible to remotely control water heating from anywhere in the world. To control the water heater using Wi-Fi, a removable Smart Wi-Fi module is used, which is connected to the device. This will significantly save energy costs. Thanks to the built-in timer, the device independently calculates the time for heating the water, which saves energy. And with the help of the LED display adjustment knob, you can set the heating temperature with an accuracy of 1 ° C. The water heater can be installed both vertically and horizontally.

Main characteristics:

• Dimensions (WxHxD): 43.5 x 97 x 26
• Power: 2 kW (220 V)
• Tank cover - stainless steel
• Heating time to maximum temperature: 114 minutes (75 ° C)
• Electronic control, it is possible to control via wi-fi and a special mobile application.
• Functions: indication of switching on, heating, there is a thermometer and a display; self-diagnosis is possible; temperature limitation is allowed; setting of a timer is possible; delayed heating possible.
• Heating element: dry heating element
• Protection: RCD, from switching on without water, from overheating. There is a safety valve.

Zanussi ZWH / S 50 Splendore XP 2.0 Silver

The water heater Zanussi ZWH / S 50 Splendore XP 2.0 Silver is a powerful storage device with an elegant rectangular design. A 50 liter tank is mounted vertically or horizontally, requiring a bottom line of communications. Comfortable operation is facilitated by the unique smartphone control function.
The Zanussi ZWH / S 50 Splendore XP 2.0 Silver has simple mechanical controls, a display and bright indicators. Thanks to the powerful tubular heater, the water in the tank reaches 75 degrees in 114 minutes. The system is supplemented with overheating protection and a shutdown function in case of malfunctions.

Main characteristics:

• Dimensions (WxHxD): 43.5 x 97 x 26
• Power 2 kW (220 V)
• Tank cover - stainless steel
• Heating time to maximum temperature: 90 minutes (75 ° C)
• Electronic control, remote control possible
• Functions: indication of switching on, heating; there is a thermometer and display; temperature limitation is allowed; there is an eco-mode; there is a timer; equipped with an antibacterial water disinfection system
• Heating element: submersible heating element
• RCD protection, from switching on without water, from overheating. There is a safety valve.

Electrolux EWH 50 Formax DL

The Electrolux EWH 50 Formax DL water heater is a model in which water is accumulated in a 50 liter tank, protected from corrosion by a glass enamel coating. Electrolux EWH 50 Formax DL is equipped with a tubular heating element that allows it to reach the required temperature in 108 minutes. The presence of a check valve helps to prevent the failure of this element. A corresponding function is provided for accelerated heating.
The maximum temperature of water heating is 75 degrees, while the pressure range of the permissible pressure is 0.8 atm. - 6 atm. Water heater power - 2 kW. The selected operating mode and temperature are shown on the built-in display.
Long service life of the device is ensured by protection against overheating and protection of the housing from splashing water. To increase the comfort of wall mounting, it was equipped with special fasteners, and the design of the device allows it to be installed both horizontally and vertically. The water supply pipe is lower.

Main characteristics:

• Dimensions (WxHxD): 34.4 x 82.5 x 35
• Power 2 kW (220 V)
• Tank coating - enamel
• Heating time to maximum temperature: 119 minutes (75 ° C)
• Electronic control
• Functions: indication of switching on, heating; there is a thermometer and display; temperature limitation is allowed; there is an eco-mode and 3 individual heating modes
• Heating element - dry heating element
• Protection: RCD, from switching on without water, from overheating. There is a safety valve.

Timberk SWH FSL2 50 HE

The storage water heater Timberk SWH FSL2 50 HE has a good capacity (50 l), which makes it suitable for use in a small family. The sleek, white, oblong-shaped body mounts horizontally to the wall and is piped from below. The so-called "dry" heating element is installed in the water heater, which looks like a heating element enclosed in a special flask. Such a heating element does not come into contact with water, which excludes the appearance of scale on it, which means that the water heater will work for a long time and efficiently.
The water in the Timberk SWH FSL2 50 HE water heater heats up quite quickly (in 43 minutes) to a maximum temperature of 75 ° C. If necessary, you can select a more suitable temperature using the rotary switch. A two-color indicator for determining the active mode will allow you to visually check the correctness of the operating parameters. A magnesium anode is placed inside the water heater, which helps to avoid corrosion of the internal elements. Protection against overpressure inside the tank and against leaks ensures safe operation of the water heater.

Main characteristics:

• Dimensions (WxHxD): 93.5 x 43.4 x 23
• Power 2 kW (220 V)
• Tank cover - stainless steel
• Maximum heating temperature 75 ° C
• Mechanical control
• Functions: indication of switching on, heating; there is a thermometer and display; temperature limitation allowed
• Heating element - submersible heating element
• Protection: RCD, from switching on without water, from overheating. There is a safety valve.

Electrolux EWH 50 Major LZR H

The highly efficient and elegant water heater Electrolux EWH-50 Major LZR is perfect for installation in almost any type of room. The high reliability of the components, the heating element made of high-quality copper and the inner tank made of stainless steel guarantee productive operation for a long time.

Main characteristics:

• Dimensions (WxHxD): 93 x 43.4 x 25.3
• Power 2 kW (220 V)
• Tank cover - stainless steel
• Heating time to maximum temperature: 120 minutes (75 ° C)
• Mechanical control
• Functions: indication of switching on, heating; there is a thermometer and display; temperature limitation is allowed; there are full and half power modes
• Heating element: submersible heating element
• Protection: from switching on without water, from overheating. There is a safety valve.

Thermex Champion Silverheat ESS 50 H

Water heater Thermex ESS 50 H Silverheat storage type has a high-strength metal body, painted white. The tank has a capacity of 50 liters, has a horizontal installation and a bottom connection. Mechanical control is used. The water heater has a capacity of 0.83 l / min, operates at a pressure of 0.5-6 bar and a rated power of 1.5 kW and heats water to 75 degrees in 105 minutes.
The device is wall-mounted and has a round tank shape. A thermometer is provided. The water heater weighs 16.5 kg and has dimensions 72.2 × 45.9 × 44.5 cm. The equipment is equipped with four degrees of protection against water, a non-return valve and a heating limiter.
The Thermex ESS 50 H Silverheat is equipped with a tubular heating element and enamelled inner walls. The presence of indicators of heating and inclusion is provided. The water heater is supplemented with a protective shutdown system and an overheating protection system.

Main characteristics:

• Dimensions (WxHxD): 72.2 x 36.5 x 37.5
• Power 1.5 kW (220 V)
• Tank coating - glass ceramics
• Heating time to maximum temperature: 114 minutes (75 ° C)
• Mechanical control
• Functions: indication of switching on, heating; there is a thermometer; temperature limitation allowed
• Heating element: submersible heating element - 2 pcs.
• Protection: RCD. There is a check valve.