Top 10 best Ballu infrared heaters: key parameters, selection features, reviews

The IF heater is an efficient and economical device for space heating. This type of technique makes it possible to create coziness and comfort in home and industrial conditions. The Ballu brand is a relatively young, but has already managed to gain popularity, a company that produces climate technology. The products are distinguished by reliability, manufacturability and affordable price; the most modern technologies are used in production.

To facilitate the selection of devices, a list of the most functional devices has been compiled. Among them it is possible to find standard heaters and more expensive fixtures. When compiling the review, the purpose of the product, its advantages and disadvantages, expert assessments and customer reviews were taken into account.

Rating TOP 10 best infrared heaters Ballu

Before compiling a list of the most functional IF heaters Ballu, the market for the best devices was analyzed. In the review, readers will be able to compare the highest quality models, explore their main parameters and choose the right product. The top heaters look like this:

BIH-AP4-1.0

A convenient heater is suitable for local heating of the working area in rooms with an area of ​​up to 12 sq. m with high ceilings or insufficient thermal insulation, where the use of conventional heating methods is ineffective. The body of the product is made of reliable metal, which guarantees wear resistance and durability of operation. The device has a power of 1000 W, it is mounted on the ceiling or fixed against the wall. Universal swivel brackets allow easy installation and adjustment of the heating angle. The product has a compact body and walls with increased angles of inclination. The high degree of dust and moisture protection allows the device to be used even in open areas.

The device emits thermal energy in the IF spectrum. Heat will reach the heated surface almost without loss. This will create a mild, proper indoor microclimate with the smallest temperature difference. In addition, while staying in the heating zone of the IF, heat is absorbed by the surface of the body and clothing, which will provide comfort even at low temperatures.

I installed the device in a carpentry shop. Mounts and bracket were included and installation was simple. The heater is slim and extremely compact. Heating is of sufficient quality, heat transfer is high. There are no extraneous smells and sounds during operation. Reliably protected from moisture and dust. I advise.

BIH-AP4-0.6

Ergonomic heater designed for local heating in rooms with high ceilings or poor thermal insulation. Universal swivel brackets in the complete set allow you to effortlessly install the device and adjust the heating angle. The product has a compact body and walls with increased angles of inclination.

The high degree of dust and moisture protection IP54 allows the device to be used even in open areas. Its location on the ceiling will make it possible to keep the working area free and prevent the risk of burns. The device has a comfortable modern control and has a long service life.The heater is resistant to aggressive weather, moisture and other influences. When using such a product, the temperature inside the room will be evenly distributed.

The device was installed in the workshop under the ceiling. The installation was straightforward. Due to the light weight, no reinforced fasteners are required. We use it to provide additional heating. Quickly copes with dampness constantly forming in the room. Recommend.

BIH-S2-0.6

A well-thought-out heater that is capable of heating rooms with an area of ​​up to 12 sq. m with a power of 600 watts. The original heating element operates on the principle of a cable “warm floor”. The greatest efficiency will be achieved with double thermal insulation using auxiliary shielding. The robust housing is protected from moisture penetration, so the device is suitable for humid rooms where it is risky to install conventional heaters.

During operation, the device will not burn oxygen inside the room, so the air will not dry out. 4 auxiliary fasteners allow you to hang the device on cables if necessary. At the same time, it is possible to install the device on suspended ceilings, which are still popular among buyers. Additional shielding reduces heat loss that occurs when the rear of the heater heats up. Due to the low noise level, the operation of the device will not create discomfort.

Silent device. I would like to note the efficiency of energy consumption. There is also the option of connecting a thermostat. Almost invisible in the ceiling space, with a competent approach and compliance with all installation requirements. The surface does not burn out and does not change the color structure.

BIH-APL-1.0

An electric IF heater with a power of 1 kW is suitable for the main and auxiliary heating of the room, as well as for local heating of the working area up to 10 sq. m. The device is designed for wall or ceiling installation. The body is made of durable materials, including anodized outer panels. In addition, it is allowed to use the product for cleaning surfaces from ice and snow. The product is energy efficient.

Includes brackets and other useful mounting accessories. Convenience of control is achieved due to the possibility of connecting to a thermostat. Ideal for indoor use: Bracket mounting with a suspension kit will significantly save floor space. In addition, during operation, the heater will not burn oxygen and create a burning smell.

Nice compact heater. Differs in economy of energy consumption and ease of installation. We bought 4 pieces for the workshop, additionally installed a thermostat. The purchase fully paid off.

BIH-AP4-0.8

Compact and slim IF heater with a nice design. Suitable for local heating of the working area in rooms with high ceilings or inadequate thermal insulation. Power of 800 W is enough to heat rooms with an area of ​​up to 16 sq. m. The body is painted with heat-resistant paint, which does not darken over time. There is moisture and dust protection, and therefore the device can be used even in open areas. The body and other elements are made of stainless steel.

Pivoting brackets are included to adjust the heating angle and ensure ease of installation. The product is placed on the ceiling or wall (you should take into account the height from 240 to 350 cm). During operation, the product will not make noise, heating is fast enough. The white-gray tones of the device will help the model fit into the overall interior.

I installed the product in a kiosk under the ceiling. Does not take up space, the air does not dry out, there is no burning smell. Electricity consumption is negligible. The case is reliable, it did not bend during installation. I advise.

BHH / M-09N

Compact IF heater, which is distinguished by its simplicity in operation and fast heating of the room. Its small size will make it easy to take it on the road (for example, to transport it to the country). The option to regulate the heating power and air heating temperature will create more comfort during the operation of the device. The operation is controlled by a control unit with 2 buttons with full and half power. The product quickly reaches the desired temperature, does not burn oxygen and does not dry out the air.

Due to the lack of convection, dust does not rise into the air during operation. The device is equipped with a reliable protective system against overturning and overheating. The heater is often used to heat small household and office premises. Its operation is especially convenient in places where there are no other sources of heat besides electricity. The device has a stylish modern design, so it can fit into any interior.

High quality heater. Heats a small room in half an hour. The heating elements also function as a lamp (the light is quite bright). The body itself is quite lightweight. Good model for the price.

BIH-APL-0.6

The product is suitable for main and auxiliary heating of domestic premises. Also, the device can be used as a heater for local heating of the working area of ​​small areas.The body is made of durable stainless steel, protected from moisture and covered with a heat-resistant special paint that does not darken over time. The 600 W power covers a heating area of ​​6 sq. m. It uses anodized panel of increased thickness (25 microns). Other features include light weight and the option of combining several such devices into a group.

Universal mounts make it possible to mount the product to the ceiling, to the wall, and also hang it on a cable. Designed for closed rooms, but also used to remove icing and prevent surface freezing. The heater is highly energy efficient. The heating pad will make the device as efficient as possible, making it possible to heat surfaces in a few minutes. The model is controlled mechanically with 1 operating mode. The product works without noise, heats up immediately after starting.

We use the device in the country in the kitchen. Installed on the ceiling, the assembly is of high quality. It functions without noise, does not dry out the air. I will also note the economical consumption of electricity. The temperature is holding up well. I'm happy with everything.

BIH-APL-2.0

A modern economical heating heater, which is designed to heat a room up to 20 sq. m. The device guarantees local heating of the working area in rooms with high ceilings or poor thermal insulation. The option of local mounting above the work area provides high energy efficiency. The heating element helps to heat layers of air quickly and thoroughly. The product can be mounted on the wall and on the ceiling, the maximum installation height is 2.4-4.5 m.

It functions without noise, does not dry out the air, does not create a burning smell. Ceiling mounting makes it possible to keep the working area free and prevent the risk of burns. Robust radiant panels with anodizing of 25 microns ensure efficiency throughout the life of the device.

I took 5 pieces to heat up a small restaurant. Installed on the ceiling, everything you need was included. Heating is fast enough, first the floor heats up, and then the objects, and then the air from them. For the convenience of control, I purchased a thermostat. In general, I am satisfied with everything.

BIH-APL-0.8

Functional heater suitable for main and auxiliary heating of domestic premises up to 8 sq. m. In addition, it is allowed to use such a device for cleaning surfaces from ice and snow. The product is highly energy efficient. Accurate control of the device is possible due to the option of connecting to a thermostat.The model is ideal for indoor use: the ability to mount on brackets with a suspension kit will significantly save space. In addition, during operation, the product will not dry out the air and create a burning smell.

It is recommended to install the device in rooms with inadequate thermal insulation, where using the usual heating methods is ineffective. The option of local installation above the place where people are, guarantees an economical use of electricity. In order to ensure effective operation, such devices are anodized with increased thickness - 25 microns. The special corrugation of the working panels will improve the efficiency of the IF heating.

I bought it for the garage, never regretted it. The device does not take up space like stationary models. Heats the room efficiently. I bought and connected a thermostat on my own. I'm happy with everything.

BIH-L-3.0

An ergonomic powerful IF heater that works effectively in closed and semi-open rooms. The power of 3000 W is enough to heat rooms with an area of ​​30 square meters. m. The device is intended for use in rooms with ceilings no more than 4.5 m. The product is suitable for mounting on any cover using a bracket or a telescopic steel leg. A high degree of moisture protection will make it possible to use the heater even on verandas.

The robust housing effectively protects the device from damage and deformation. Convection cooling prevents the model from overheating. The design assumes power regulation and a thermostat. The ribbed reflector will ensure even heating of the space. The heater can be turned at the required angle, the control is mechanical. The protective grill prevents burns, the device turns off during overturning. The thermostat helps to protect the product from overheating, as well as to maintain the desired room temperature.

Convenient heater. Fixed it on the wall in the garage. It is quite comfortable at a distance of up to 6 m from the device. The safety net provides protection against impacts and small particles. The thermostat helps maintain the temperature, eliminates overheating. I advise.

Types of radiators in heaters

The performance of infrared heaters will depend on the type of radiator. Main types:

• Heating element. The most powerful and durable. Has no visible light, but is capable of emitting mild noises.
• Ceramic. It features fast heating and cooling, economical consumption of electricity, and high price.
• Carbon (quartz). Has a fairly high efficiency. It is characterized by low energy efficiency and short service life.
• Halogen. It is distinguished by the delivery of short waves, which are less beneficial for the human body. In this regard, such heaters are suitable only for short-term use.

Tips for choosing IF heaters

Before buying an infrared heater, you should focus on the key parameters of product selection. The main ones are:

• Power.It is recommended to build on the ratio of 1 kW per 10 sq. m. However, it is optimal to buy products with a capacity slightly higher than the calculated one.
• Execution. Devices can be ceiling-mounted, wall-mounted or floor-standing. Ceiling have a wider radiation range, they are placed in large rooms. Floor standing ones are suitable for carrying around the rooms.
• Moisture protection. When it is planned to use the heater on the veranda or in the bathroom, then this parameter will be extremely important when choosing.
• Protection level. High-quality devices are equipped with overheating protection - this will not allow them to burn out under heavy loads. Floor products have the option of automatic shutdown when overturning.
• Type of emitter. These are heating elements, halogen or quartz lamps. Each type of emitter has certain pros and cons (for example, quartz heats up quickly, and the heating element is highly energy efficient).
• Additional functionality. Overheat and rollover protection indicators increase the fire safety of the instrument. The thermostat helps maintain the desired temperature inside the room, the remote control will allow you to control the product from a distance.