Heating radiators rating for apartments and houses 2020

Gone are the days when we all lived in buildings equipped with the same heating radiators. These cast iron monsters were large in size, but reliable and efficient enough to work with. Their other problem was in appearance and design: in Soviet times, they did not think much about beauty, because the main thing is that the battery warms up constantly and stably. Today the situation has changed dramatically: on the market you can find more technically advanced radiator heating systems that not only work efficiently, but also look very good outwardly.

The rating offered by us includes the best heating radiators intended for installation both in private houses and in apartments.connected to the central heating system. The selection includes: bimetallic, aluminum, cast iron and steel radiators.

TOP-10: Rating of heating radiators for apartments and houses 2020

The best radiator heating systems for apartments

Global STYLE PLUS 500

The product from the Italian company is sold in stores with a ten-year manufacturer's warranty, which already proves the high quality of workmanship. It features a high level of heat dissipation, since each section is made of a steel core and an outer layer of aluminum. Withstands pressure up to 35 atmospheres, so the heating battery can be safely installed in an apartment of a multi-storey building. The design of the internal cavities of the radiator excludes the formation of air congestion, which also protects against water hammer.

Advantages of the model:

• Nice design;
• Effective level of fast heat transfer;
• Italian quality;
• Resistant to water hammer.

Identified disadvantages:

• They do not heat well at a low temperature of the coolant;
• Quite a high price.

Rifar Monolit 500

The bimetallic model, made of aluminum and steel, made it to our rating due to its amazing survivability and reliability. The unique design of the product practically does not allow the possibility of leaks, and the excessive parameter of resistance to a maximum pressure of 100 atmospheres allows you not to fear water hammer. Another plus is unpretentiousness to the quality of the liquid heat carrier used in the central heating system.

Advantages of the model:

• Reliability and durability;
• Minimal risk of leaks;
• Nice appearance;
• Resistance to water hammer;
• No sharp corners.

Identified disadvantages:

• Sold in pairs only;
• Price.

Sira RS Bimetal 500

The heating battery is also made of steel and aluminum, which helps to significantly increase the rate of heat transfer.It is capable of operating at an internal pressure of 40 atmospheres, which is more than enough for connection to a central heating system. In addition to apartments, it can also be used in offices, since it provides for the simultaneous use of 20 sections.

Advantages of the model:

• Workmanship;
• High level of resistance to water hammer;
• Attractive design;
• High heat dissipation.

Identified disadvantages:

• High price.

МЗО МС-140М-500

Unkillable Soviet classics: a model for those who are experiencing financial difficulties or want to save money on the purchase of radiator heating systems. Heats up slowly, but also cools down slowly. Made in Belarus, the manufacturer gives a modest three-year warranty, but this battery will last much longer.

Advantages of the model:

• Unpretentiousness;
• Resistance to water hammer;
• Good heat dissipation;
• Minimum cost.

Identified disadvantages:

• Dimensions and weight;
• Unpresentable appearance.

Viadrus Styl 500/130

A more expensive version of a cast-iron radiator heating system with an attractive appearance and good performance. Made in Czech Republic, workmanship is above average. Suitable for installation in low-rise buildings, it is not recommended for installation in high-rise buildings due to its low resistance to internal pressure drops: the battery is designed for an average operating pressure of 12 atmospheres, the stability threshold according to the data sheet is 18 bar.

Advantages of the model:

• Good heat dissipation;
• Reliability;
• Workmanship;
• Low price;
• Unpretentiousness to the quality of the fluid used for heat transfer.

Identified disadvantages:

• Weak resistance to water hammer;

The best radiator heating systems for private houses

Thermal Standard Plus 500

Product of the Russian defense enterprise Zlatmash. Made by pressing, compares favorably with competitors' products in price and high level of heat transfer. The battery will function normally even at a pressure of 24 atmospheres: according to this parameter, it is also suitable for installation in high-rise buildings. Unfortunately, like all aluminum batteries, the product is sensitive to the acidity level of the coolant, so it should only be installed in private houses.

Advantages of the model:

• High level of heat transfer;
• Low weight;
• Low price;
• With proper use, it will last a long time.

Identified disadvantages:

• Sensitivity to the quality of the coolant.

Sira Alice Royal 500

The strict contours of the radiator fins give the model versatility, so that it can perfectly fit into any interior of the room. Parts are injection molded for added durability and long life when used correctly. It works stably at a pressure of 16 atmospheres, the warranty period from the manufacturer is 15 years.

Advantages of the model:

• Appearance;
• The weight;
• Acceptable price;
• Long service life.

Identified disadvantages:

• Will suffer from corrosion if the wrong heat transfer fluid is used.

Kermi FKO 22 500 1000

Steel panel radiator with side connection. It is made in the form of a monoblock, so it is easy and quick to install. The corrugated fins increase the level of heat transfer, and a small amount of liquid used for heat transfer will speed up the heating process. Made in Germany, carefully assembled from quality materials. Unfortunately, the device is designed only for use in the private sector and can withstand a maximum pressure of only 13 atmospheres.

Advantages of the model:

• Aesthetic appearance;
• Fast and efficient heat dissipation;
• Easy installation;
• Made in Germany.

Identified disadvantages:

• Overpriced;
• Weak resistance to water hammer.

Rifar Base Ventil 350

A versatile bimetallic alloy model suitable for multi-apartment buildings or private homes. Installed quickly, ribs of different heights can be selected.It will work stably at a pressure of 20 atmospheres and a coolant temperature of 135 degrees Celsius. The only negative, apart from the price, is the quality of the painting.

Advantages of the model:

• Good level of heat dissipation;
• Appearance;
• Build quality;
• Versatility;
• Fast installation.

Identified disadvantages:

• At elevated temperatures, the paint will quickly cover the battery.

KZTO Elegant 1 250

Compact, bimetallic radiator that can be installed on the floor or attached to the wall. An alloy of copper and aluminum is responsible for heat transfer: it provides increased efficiency of the device. Only water is used as a heating medium, which limits the possibilities of using the radiator (not suitable for installation in some district heating systems). The maximum working pressure is 15 atmospheres.

Advantages of the model:

• Compact dimensions;
• Efficient and economical use of heat sources;
• Several painting options to choose from;
• Good equipment: it includes a Mayevsky crane.

Identified disadvantages:

• Price;
• Flimsy thread at the junction of the system connection.

What should be considered when choosing heating radiators? What is the best radiator to buy?

When buying new radiator heating systems, it is imperative to find out from what materials the device is made. For example, when installing a new battery in an apartment, two options, namely steel and aluminum radiators, should be discarded immediately: the former suffer greatly from pressure drops, and the latter from corrosion. Bimetallic models are good for everyone, but at a price they are much more expensive than other types of products. If reliability is important to you and you do not want to overpay extra money, then you should dwell on the usual heating systems made of cast iron: on the market you can find many decorative products made of this material with an attractive appearance, extraordinary design and at an affordable price.