Construction and repair Top products 

Rating of the best electric underfloor heating

Most often, a warm electric floor is mounted under floor coverings such as tiles and the like, since they are considered "cold". Under a wooden or fabric covering, underfloor heating is rarely installed, this is due to the fact that these materials have poor thermal conductivity.

In addition, under the influence of heat, wooden elements can dry out and lose their appearance, and synthetic coatings can emit harmful substances during heating.

Infrared underfloor heating appeared relatively recently, its advantage is that it is laid dry, so it can be installed under floor coverings such as carpet, laminate or parquet.

Best Electric Tile Flooring

A cold floor is particularly uncomfortable if ceramic tiles are used as the topcoat. This is a practical material that is used in the decoration of bathrooms, bathrooms, kitchens, halls, living rooms. More than 75% of warm floors are installed under ceramic tiles and porcelain stoneware. The basis for these materials is the screed, therefore the use of heating mats and cable systems designed for wet installation is the optimal solution for heating.

Such a warm floor under the tiles will consume a small amount of energy, and due to the high thermal conductivity of ceramics, it will provide uniform heating and good heat transfer.

Warm floor No. 1 TSP-150-1.0

A heating mat of Russian production, made on the basis of a two-core wire. The heating cable has a small diameter - a cross-section of 3 mm allows laying not only in a screed, but also in tile adhesive. The wire is attached to a polymer mesh, which has good adhesion to cement-based adhesives. This increases the reliability and service life, the intervals between scheduled repairs of the floor covering.

Underfloor heating is supplied with tapes of 2x0.5 m format. The step is very convenient, it makes the installation of heating mats as simple as possible in rooms with a complex layout. The power of the set is 150 W, which helps to reduce heating costs. The maximum heating temperature of 80 degrees makes it possible to lay outdoors.

The manufacturer produces a wide range of self-regulating and resistive cables, which has a positive effect on price reduction. For the underfloor heating, a core in fluoroplastic insulation was chosen, which withstands temperatures up to 200 degrees and ensures trouble-free operation of the heating mat.

Advantages:

  • High heating rate;
  • Manufacturer's warranty for 20 years;
  • The service life is not less than 50 years;
  • Low price;
  • Corrugated tube for temperature sensor included.

Disadvantages:

  • Not found.

Warmstad WSM-300-2.0

At the heart of the heating mat is a two-core wire laid on a mesh made of strong and durable polymer material. The total thickness is only 4 mm, which allows laying the warm floor in the glue solution before installing the tiles. This has a positive effect on the parameters of the "pie" and does not raise the floor level.

It is supplied in the form of mats in the 4x0.5 m format, it is possible to use the warm floor for the systems of the main and additional heating. The roll is easy to unfold, allowing you to quickly finish laying in rooms with complex layouts. The specific power is 150 W / m2. makes the warm floor economical, comfortable to use as additional heating. The mats are designed for rooms with normal and high humidity.

Advantages:

  • Good insulation quality;
  • Manufacturer's warranty for 25 years;
  • Good shielding;
  • Mounting tube included;
  • Low price.

Disadvantages:

  • Poor quality of couplings.

SpyHeat Classic SHD-15-600

The heating cable is designed to be laid in a screed or in an adhesive layer when installing tiles.A two-core resistive wire with a power of 15 W / m can be used as main and additional heating under a topcoat with high thermal conductivity. A feature of the cable is an oval cross-section, the wire has a small thickness and does not affect the floor level in the house.

The set is designed for heating 5 sq.m. floor, when used for main heating - by 3 sq.m. Laying the cable will avoid the "zebra" effect, will provide an even distribution of heat over the entire area. To protect the veins from the negative effects of the cement mortar, the manufacturer used a fluoroplastic sheath.

Advantages:

  • Resistant to local overheating;
  • Rapid heating of the room;
  • Manufacturer's warranty for 50 years;
  • The laying step can be changed in the range from 5 to 15 cm;
  • It is convenient to work in rooms with complex layouts.

Disadvantages:

  • Complex installation.

The best electric underfloor heating for laminate

The popular finishing flooring has a "warm" design, but with tactile contact, property owners always experience a little discomfort. The laminate used in the underfloor heating system must be at least 8 mm thick. Infrared bands or a thin dry-laying heating mat can be used as a heating element at any stage of the renovation. Heating cable and electric mats, classic for warm floors, are used in the preparation of the screed.

Teplolux Express

A unique solution for those who did not dare to install a warm floor under the laminate. Teplolux has come up with equipment for an additional, portable heating system. The Express heating mat can be installed on laminate flooring. A heating system based on a thin heating cable will not harm the finished floor covering. From above, the mat is covered with a carpet, connected to the network and used as an additional source of heat in the nursery, study, living room or in the country.

The dimensions of the heating mat are 2x1.4 m, the power is 300 W. Heating equipment can be used in a small room during the off-season, in rental housing. The heating element has a dense, elastic shell made of practical artificial felt.

Advantages:

  • The mat is ready for use;
  • A convenient bag is provided for carrying;
  • Universal plug;
  • Dust and moisture protection class IPX7;
  • The maximum surface temperature is 30 degrees.

Disadvantages:

  • Time to reach the operating mode is 60 minutes.

Devi Devicomfort 150T

Heating mat based on a thin two-core wire. The total thickness of 4 mm allows you not to worry that the installation of a warm floor will have a strong impact on the height of the ceilings. The self-adhesive surface simplifies installation: the mat is well fixed to a clean, primed floor, the floor covering is laid on top. The set includes a roll with an area of ​​4 sq.m. (length 8 m). The specific power is 150 W / m2. allows to use for main and additional heating.

The maximum heating temperature is 70 degrees. The aluminum shield increases heat dissipation, increasing system efficiency. The outer PVC insulation guarantees reliable protection against mechanical damage.

Advantages:

  • PTFE cable insulation protects against local overheating;
  • Manufacturer's warranty for 20 years;
  • Internal Teflon insulation;
  • Connecting cable 2.3 meters included;
  • Good bending radius.

Disadvantages:

  • High price.

XiCa RexVa XM-305

The South Korean company offers an ultra-thin infrared warm floor for a laminate with a width of 50.5 cm. The thickness of the film base is 0.338 mm, while the specific power reaches 220 W / m2. Supplied in sheets, 2 meters long. Technical characteristics allow using heating elements as the main heating for heating a country house, office or summer cottage.

The film emits waves in the infrared range, with a length of 5 to 20 microns, which heats not only the laminate, but also the furniture. This increases the rate at which the room warms up.The surface of the heating element heats up to 50 degrees during operation, and at peak values ​​it can withstand temperatures up to 130 degrees. The film is self-extinguishing and does not support combustion. Fits in with polyethylene foam insulation, which is purchased separately.

Advantages:

  • Low price;
  • Minimal electromagnetic radiation;
  • Dry installation;
  • High efficiency - 90.5%;
  • Profitability.

Disadvantages:

  • Additionally, you need to buy a thermostat and a mounting kit.

The best electric floors for linoleum

In underfloor heating systems with linoleum, it is recommended to use IR-film. This material provides uniform heating over the entire area, and thermostats help to set the temperature with high accuracy. At temperatures above 28 degrees, linoleum can begin to stretch, which will negatively affect the quality of the material. A feature of infrared film is the ability to provide comfortable air temperature indicators with a low heating level of the floor covering.

Electrolux ETS 220-4

The set from the Swedish company is designed for heating 4 sq.m. useful area. Infrared film 0.338 mm thick is resistant to high temperatures - up to 110 degrees. Heating elements are made of carbon and can be used in living rooms, on open terraces and areas. The package contains everything you need for installation: wiring, clamps, electrical tape.

Specific power 220 W / sq.m. allows the use of underfloor heating for auxiliary and main heating. IR elements quickly heat up the flooring, furniture, which give off heat to the air and create a comfortable environment in the room. Energy consumption is significantly lower than that of cable heating systems due to its high efficiency.

Advantages:

  • Resistant to corrosion of all elements;
  • The degree of protection against moisture and dust corresponds to the class IP52;
  • Dry installation;
  • Minimum indicators of electromagnetic radiation;
  • Manufacturer's warranty 15 years.

Disadvantages:

  • The high price of the kit.

Eastec Energy Save PTC

A new generation heating film in an easy-to-install format 1x1 m. A self-regulating heating element in the place of local overheating reduces the load by 25-30%, which protects the linoleum from thermal deformations. At the heart of the IR-film are carbon elements, reliably protected from moisture and mechanical damage by high-strength electrical polyester. Specific power 220 W / sq.m. makes the heat source universal.

The busbars are made of high purity copper, the contacts are made of silver paste. The design features have a positive effect on the efficiency and profitability of the application. It is allowed to use the film in open areas and in living rooms. The maximum heating temperature is 60 degrees. It is recommended to lay in strips up to 8 meters, with a cutting line pitch of 25 cm.

Advantages:

  • Convenient installation;
  • Manufacturer's warranty 15 years;
  • Service life 50 years;
  • Electricity consumption is 30% lower than that of competitors in the class;
  • High thermal safety of the base.

Disadvantages:

  • The kit does not include a thermostat and mounting "crabs".

National comfort PNK 220

Practical infrared film for dry installation under linoleum. It is based on a long-lasting carbon fiber element. The outer shell is made of durable polyester fabric that can withstand significant static loads. The film format is convenient for working on balconies, in living rooms with complex layouts and offices.

Specific power 220 W / sq.m. makes the equipment relevant to the main heating system. The manufacturer offers to purchase an additional programmable thermostat. When installing this equipment, IR-film will save up to 70% of electrical energy, and the ability to select the desired mode will help reduce heating costs in the absence of tenants in the house. Safety is ensured by double-layer wire insulation.

Advantages:

  • Uniform surface heating;
  • Simple and quick installation;
  • The floor level does not rise noticeably;
  • Lack of electromagnetic radiation;
  • Fast warm-up;
  • Good equipment.

Disadvantages:

  • Parts are only guaranteed for 1 year.

 



Electronics

clothing

Repair