The best manufacturers of acrylic bathtubs expert advice

A person rarely thinks about buying a bathroom in his adult life: according to the results of surveys of marketers - about 1-3 times, no more. Therefore, it will be doubly offensive to purchase low-quality consumer goods that can lose their presentation in just a few years of use. This is especially true of acrylic bathtubs, as the most fragile in comparison with cast iron and steel samples of this plumbing.

TOP-10: Rating of the best manufacturers of acrylic bathtubs according to experts

To choose a good bathtub, we advise you to study our rating, which includes the best manufacturers that produce acrylic bathtubs. We advise you to carefully study it in order to avoid a negative experience with the purchase. The survey included the most worthy companies in the opinion of experts and consumers who bought their products.

10th place. "Bas"

Russian manufacturer offering about 100 models of acrylic bathtubs. For manufacturing, it uses imported equipment, therefore it produces high-quality products that meet European standards. Acrylic baths are made by vacuum stamping, during the final processing, an antibacterial coating is applied to the outer surface. Each model can be integrated or installed independently.

✅ What buyers and experts liked:

• Long term of warranty service - ten years;
• Variety of models;
• Acceptable price.

❌ Disadvantages:

• Unpleasant factory smell;
• There are complaints about marriage;
• "Clumsy" design of some models.

9th place. "Triton"

Another domestic manufacturer is widely known not only in our country, but also in neighboring countries. The line of models of acrylic bathtubs is also quite extensive - about 60 items. In addition to the proven technology of vacuum stamping (equipment made in the USA is used), it also produces bathtubs using the manual forming method - they are more durable and reliable.

✅ What buyers and experts liked:

• Decent product range;
• Availability of models of various sizes;
• Pricing policy of the company: there are decent models for a small price;
• Large selection of corner baths, as well as with hydromassage;
• Possibility of additional equipment.

❌ Disadvantages:

• Judging by the reviews, you can find defective products;
• Some of the products are not intended for overweight people;
• A number of models have very thin walls.

8th place. "Kolo"

A Polish company that has appeared on the Russian market relatively recently. Buyers note the high quality of acrylic baths, which is not surprising: the manufacturer uses new, European, recently manufactured equipment. The model range is extensive, the company initially offers baths of various colors and configurations.

✅ What buyers and experts liked:

• Workmanship;
• Service warranty period;
• Models are available in a wide variety of shapes and colors.

❌ Disadvantages:

• There are very few models with a pre-installed hydromassage;
• Hard enough to find in the market.

7th place. Villeroy & Boch

The top 7 manufacturers open the famous French brand Villeroy & Boch. It is almost two centuries old and its products are very popular in the EU countries: they are of high quality, reliable and durable. In addition to the usual plumbing, this company produces acrylic bathtubs that are distinguished by their graceful forms and versatility.

✅ What buyers and experts liked:

• The products meet the strict European standards;
• Extensive assortment;
• Exquisite design.

❌ Disadvantages:

• Really high price: only because of not the company did not enter the top prize-winners;
• Difficult to find in the Russian market;
• Lots of fakes.

6th place. Pool SPA

Spanish company famous for interesting bathroom design projects. Offers an extensive line of acrylic bathtubs of various shapes. All products are made with high quality and meet all the necessary standards. The complete set of each individual model is well thought out and varied.

✅ What buyers and experts liked:

• Design;
• Quality and durability;
• Variety of assortment and accessories.

❌ Disadvantages:

• It is difficult to find a non-fake;
• High price for original products.

5th place. "Aquanet"

The best Russian manufacturer of acrylic bathtubs, according to most experts. In addition to the variety of models, it is famous for its good, one might even say, good quality of manufacturing acrylic bathtubs. Also, in addition to baths, it offers a wide range of additional accessories for each model: headrests, headrests and handrails. An additional plus is the low price compared to foreign models.

✅ What buyers and experts liked:

• Extensive assortment;
• Workmanship;
• Adequate price.

❌ Disadvantages:

• Complaints about defective products;
• A number of models, due to the thickness of the walls, are not intended for large people.

4th place. "Riho"

Dutch company specializing in the production of various bathroom fittings. I was pleased with the high quality of production of acrylic bathtubs, however, this is not surprising for European companies. What is really important is the thickness of the walls of the products: from 0.6 to 0.8 cm at the thinnest bathtub. Like other European companies, it offers a lot of additional accessories and various bathroom designs that can emphasize and embellish almost any bathroom interior.

✅ What buyers and experts liked:

• Sturdy construction of models;
• Quality materials;
• Various equipment;
• Interesting design solutions.

❌ Disadvantages:

• Price: lower than that of other well-known Western European brands, but still quite high.

3rd place. "Cersanit"

A Polish-Romanian-Russian joint venture that has won a significant share of the Russian market for the sale of sanitary ware. Despite the fact that acrylic products are made by us, the company's bathtubs from this material are of excellent quality. In addition to this advantage, it is worth noting the variety of models and a large assortment of components. The last but not the last argument in the list is the price of the product: it is much lower than that of European counterparts.

✅ What buyers and experts liked:

• Price;
• Wear resistance and reliability;
• Variety of models.

❌ Disadvantages:

• Economy class products are not suitable for people with heavy weight - the walls are too thin;
• Possible marriage.

2nd place. "Ravak"

The silver medalist of our top of the best manufacturers of acrylic bathtubs was the Czech company "Ravak", which released its first model of acrylic bathtubs at the end of the last century. Over the past twenty years, she has released about 25 serial models of this plumbing. Today, many experts describe its products as bathrooms with a convenient and comfortable design for use. Considering the durability, reliability and adequate price for most of the models, the Ravak company takes the second place, just slightly behind the gold medalist of the rating.

✅ What buyers and experts liked:

• Price;
• Quality;
• Durability;
• Range.

❌ Disadvantages:

• The cost of components must be paid separately;
• There are many fakes, you need to choose carefully.

1st place. "Roca"

Unanimously, according to buyers and experts, the best manufacturer of acrylic bathtubs, whose products are available on the Russian market, remains the Roca company. Immediately, we want to note that the bathrooms displayed under this brand on the shelves of our stores are made at production facilities located in the Russian Federation, that is, a subsidiary of the company.But this fact does not affect the workmanship in any way: all acrylic bathtubs meet all quality standards and, unlike other Russian companies, the number of defects is minimal. Buyers will be able to choose a model from 200 different product options, the range of accessories is also quite diverse. The factory warranty for baths is up to 10 years, for additional components - for 2 years.

✅ What buyers and experts liked:

• Acceptable price;
• High quality workmanship;
• A variety of models and accessories.

❌ Disadvantages:

• Lots of fakes.

Acrylic bathtubs: which manufacturer is better?

We can answer this question as follows - there is simply no clear leader, each of the companies in our rating has its own advantages and disadvantages, which will be more important for each of us. The only thing worth noting is that the quality of manufacture of foreign manufacturers, if better than domestic, is not much better, but the price is very different: in some cases, almost an order of magnitude. Overpaying extra money "for the name" is hardly worth it.