What brake discs are better to put on Lada Grant: TOP-6 best brake discs

Brake discs are one of the main parts of a vehicle responsible for safety while driving, as well as for a comfortable ride. When the driver presses the brake pedal, they rub against the pads, causing the car to stop. Consequently, this element is constantly experiencing increased loads. In order for the part to serve for a long time, as well as to ensure the safety of using the vehicle, you need to choose high-quality products from trusted manufacturers. We will tell you which brake discs are better to put on Lada Granta and give the TOP of the best brake discs. Of these, you can choose the best option for your car, which will completely suit you in terms of its characteristics.

TOP of the best brake discs for Lada Granta

Compiling our TOP, we carried out a thorough analysis of the brake disc market. We studied the characteristics of the products and selected only the best models for you. Each of them has received numerous positive reviews from vehicle owners.

Best front brake discs

Here are the best front brake discs.

No. 4. Alnas Sport 2112-3501070-01

These are high-quality cast iron discs with a long service life. Spare parts provide smooth, vibration-free braking. The elements quickly "rub in" to the system and sit like a glove.

The model is characterized by a long warranty period. However, it is valid only when the parts are installed in the service center, about which the relevant documents must be.

Specifications:

• material - cast iron;
• minimum thickness - 18;
• number of holes for fasteners - 4;
• centering diameter - 58.5 mm;
• weight - 12 kg.

No. 3. ATE PowerDisc

These are high-quality German-made brake discs made of high-carbon cast iron. Products are characterized by increased strength, resistance to low temperatures and temperature extremes. Elements provide smooth and efficient braking without wobbling. The model is characterized by a long operating period and an acceptable cost. Products have reliable protection against the accumulation of gas cushion between these parts and pads. Consequently, the braking system will not lose its effectiveness due to this.

Specifications:

• material - cast iron;
• minimum thickness - 23;
• number of holes for fasteners - 5;
• centering diameter - 63.5 mm;
• weight - 8.28 kg.

No. 2. BREMBO MAX 09.8903.75

These Italian discs are of good quality and high efficiency. The elements provide high-quality braking of the vehicle without beating and vibrations. The parts are characterized by a long service life and ease of installation. In the first days of use, unpleasant sounds may occur, but over time they disappear.

Specifications:

• material - cast iron;
• minimum thickness - 18;
• number of holes for fasteners - 4;
• centering diameter - 58.5 mm;
• tightening torque - 75.

No. 1. Bosch 0986479346

These are inexpensive brake discs that are of excellent quality and durability. The model guarantees high-quality braking of the car, during which there will be no vibrations and beats. These brake discs do not squeak or make other unpleasant sounds. The products are characterized by increased durability and long service life.

Specifications:

• material - cast iron;
• minimum thickness - 18;
• number of holes for fasteners - 4;
• centering diameter - 58.5 mm.

Best rear brake discs

Here are the best items for the rear axle.

No. 2. TRW DF7257

These are high quality wear resistant products that provide quick and easy braking without vibration and runout. The cells do not overheat even after many hours of driving. Parts are distinguished by increased strength and long service life.

Specifications:

• material - cast iron;
• minimum thickness - 8.5;
• number of holes for fasteners - 5;
• centering diameter - 62 m;
• weight - 10.8 kg.

No. 1. BM BDV 292

This is a high quality model that is durable. The spare part will serve for a long time even under conditions of increased loads and during daily operation of the vehicle. The model provides high-quality braking even if the car is moving at high speed. In this case, vibration and beating do not occur.

Specifications:

• material - cast iron;
• packing - 1 pc.;
• packing - 27.6x27.6x3 cm;
• weight with packaging - 14.4 kg.

Reasons for replacing parts

One of the main reasons for replacing brake discs is normal wear and tear. In addition, it is recommended to install new parts instead of old elements in such cases:

• premature failure of the disks, which can be determined by the deterioration in the quality of braking of the car;
• damage to product surfaces;
• deformation of spare parts.

Attention! In any of these cases, it is recommended to replace the brake discs in order to avoid a hazardous situation while the vehicle is moving.

Replacing brake discs

You can replace the brake discs yourself. The main thing is the availability of a place for work, as well as the necessary materials and tools. When performing the appropriate manipulations, it should be remembered that the procedure for replacing the front and rear auto parts has some differences.

Required materials and tools

To replace the brake discs, you will need the following materials and tools:

• directly the parts themselves;
• jack;
• wrenches designed for nuts 7, 13 and 17 mm, as well as a wheel wrench;
• torx t12 head for unscrewing and dismantling the caliper;
• grease;
• extension;
• ratchet;
• hammer.

Replacing the front brake discs

To replace the front elements, proceed as follows:

1. Remove the wheel and jack up the vehicle.
2. Remove the guide fasteners and fold back the stopper to remove the old pads.
3. Place the staple on the hanger.
4. Unscrew the disc fasteners, lubricate them to facilitate dismantling, then remove the elements - if the elements cannot be dismantled, carefully hit them with a hammer from the back side.
5. Install new parts and tighten the fasteners.

Attention! When performing the disc replacement procedure, it is also recommended to install new pads.

Replacing the rear brake discs

To change the rear elements, follow these instructions:

• dismantle the wheel and raise the vehicle with a jack;
• remove the caliper, pads and disc;
• install new parts - first put the disc, then assemble the caliper and fix the pads.

Rules for choosing brake discs

To select suitable spare parts of this type, when purchasing products, it is recommended to focus on the following points:

1. Material. It is recommended to give preference to high carbon cast iron brake discs. The fact is that it is precisely such a material that is resistant to high and low temperatures, as well as temperature drops. In addition, it is characterized by increased strength, so it is less prone to deformation and cracking. Consequently, high carbon cast iron discs will last for a long time.
2. Presence of anti-corrosion coating. It extends the service life of the parts.
3. Manufacturer. Professionals recommend giving preference to proven brands, since they are the ones who guarantee the high quality of their products.
4. Price. In this case, you need to focus on your budget size. Even among inexpensive discs, you can choose high-quality spare parts.

So what kind of brake discs are better to put on the Lada Grant? It all depends not only on the characteristics of the spare parts, but also on the size of the budget. So, if you are looking for inexpensive front discs, then take a look at the Bosch model 0986479346. If you decide to buy high carbon cast iron front discs and cost is not the main selection criterion for you, we can recommend you the ATE PowerDisc product. If you need discs for the rear axle, we advise you to take a closer look at the BM BDV 292 option. Our TOP and tips will help you choose the right brake discs for Lada Granta.