What are the best H7 low beam lamps - rating of the TOP 15 best lamps
A selection of the best models with H7 base
Let's get acquainted with the rating of the best models, compiled on the basis of customer reviews and product specifications.
TOP 3 standard halogen lamps
Such lamps are distinguished by their reliability, ease of installation, affordable price and high performance.
# 3. Neolux Blue Light H7
The model is intended for low beam, provides intense illumination regardless of road conditions. Even in adverse weather conditions, the driver will be provided with a sufficient level of safety. On average, for a set consisting of 2 lamps, you will have to pay from 720 rubles.
pros
- ease of installation;
- the driver does not get tired of the light during prolonged driving;
- there is protection against UV rays;
- the glass from which the flask is made is heat-resistant.
Minuses
- the service life of such lamps is short.
Important! When installing such lamps, do not touch the bulb with your hands, otherwise they will leave prints that could lead to premature damage to the product.
# 2. Goodyear Halogen Н7 12V
The power of this halogen product is 55 W. The model is capable of producing a color temperature of 3200 K and a luminous flux of 1500 lm. For the manufacture of flasks, quartz glass is used, which has a UV filter (the latter will protect the headlights from the harmful effects of ultraviolet rays) and produced in Germany.
pros
- UV protection;
- the distribution of the light flux is uniform;
- can be used for both low and high beam;
- the beam length is increased by one and a half times.
Minuses
- short service time inherent in all halogens, as well as increased heating.
# 1. Narva Н7 Standard 24V
The model is intended for installation in vehicles with a 24 V on-board network (often trucks). Thanks to the PX26d base with a flange connection and two contacts, the lamp can be placed at the desired distance from the reflector. The model produces white color with a glow temperature of 3000 K. The lighting angle reaches 320 degrees. Power consumption - 70 watts.
pros
- the right shoulder is well lit;
- the flask is made of high quality glass;
- ease of installation;
- high luminous efficiency.
Minuses
- the illumination of the road surface is slightly lost.
TOP-3 halogen with increased flow
For reinforcement, a filament with a high melting point is used (due to this, the glow temperature rises) and a special gas mixture (it is pumped into the flask under high pressure).
# 3. Blik UltraLight +120 Н7 24V
The power supply of this model is carried out from the on-board electrical network with a voltage of 24 V. In other words, the lamps are intended for trucks, buses, and special equipment. Characteristically, the luminous flux in this case is 120 percent higher than that of a standard lamp.
pros
- the flask is transparent, but on top with a blue color;
- the light is comfortable for the eyes;
- ease of installation;
- high degree of security.
Minuses
- short operational period.
# 2. General Electric Н7 MegaLight Ultra +120 GE98264
This model uses an improved filament with a special coating. Which led to an increase in the brightness of the lighting (by about 120 percent when compared to the standard). There is protection against ultraviolet radiation, which is especially important if the headlights on the car are plastic - so it is less likely that they will become cloudy.
pros
- light is better reflected from signs, markings on the road;
- quartz glass is used for the manufacture of the flask;
- the light is white, pleasant to the eyes;
- there is protection against UV rays.
Minuses
- the product is not easy to pull out of the package, so as not to touch the flask.
# 1. PIAA H7 Hyper Arros HE-923
The model is produced in South Korea. The glow temperature is 5000 K, the power consumption is 55 W. It is powered by a standard voltage of 12V.Typically, such lamps are placed by the manufacturer in a plastic container, from which they can be easily removed. The container also prevents damage in transit.
pros
- thanks to well-thought-out packaging, you will not touch the bulbs when removing the lamps;
- reliable metal holder;
- the material for making the flasks is quartz glass (there is a blue coating);
- high luminous efficiency.
Minuses
- quite high cost (from 2000 rubles).
TOP-3 halogen lamps with extended service life
Such models are capable of working up to 4000 hours (in contrast to conventional halogen lamps, the resource of which is about 200-300 hours). For this, the light output was reduced, which led to a decrease in the rate of destruction of the filament.
# 3. Bosch Longlife Daytime H7
The operating time, increased three times, and the increased power of the light flux made it possible to ensure that the model is suitable for all passenger cars that use low beam at night / day. This is a great alternative to the stock car lamp for daily use.
pros
- the light is as close to daylight as possible;
- resistance to temperature changes, vibrations;
- another plus is versatility;
- the distribution of light on the road and shoulder is uniform.
Minuses
- such lamps are dull.
# 2. Osram Ultra LifeН7 64210ULT-02B
According to the manufacturer, when the headlights are turned on for 60 percent of the time, these lamps will last for 100,000 kilometers. The power consumption of the model is 55 W, it is powered from a 12 V network. It can last at least 1000 hours (maximum - 1500).
pros
- very reliable packaging;
- the presence of UV protection;
- durable holder made of metal;
- the flask is made of high quality glass.
Minuses
- The resource specified by the manufacturer is not developed in all cases.
# 1. Philips LongLife EcoVision H7
A lamp like this will last 4 times longer than a standard automotive product. Equipped with excellent quality filament and therefore requires minimal maintenance. For a couple of such lamps, you will have to pay at least 800 rubles.
pros
- durability;
- high quality quartz glass from which the flask is made;
- resistance to ultraviolet radiation;
- water resistance at a high level.
Minuses
- shorter illumination range when compared with competitors.
TOP-3 LED bulbs H7
LED is a conductor that perfectly controls electrical flow, and therefore LED lamps are more energy efficient and brighter. They are also durable, easy to install, and have an increased light transmission index. Consider the best models.
# 3. Sho-Me G8.2 H7 6000K
These are the same bright lamps as xenon, but have a more versatile, simpler and vibration-resistant design. Moreover, they are also less fire hazardous. The Sho-Me G8.2 model can last at least 10 thousand hours (maximum - 50 thousand).
pros
- no blinding effect;
- considerable service life;
- significant heat transfer area of the radiator;
- the presence of a clear light border.
Minuses
- it is sometimes difficult to adjust the beam of light.
# 2. Baxster SE-Series Н7 6000K
Such lamps are made on the basis of Korean Lattice chips, capable of shining twice as strong as competitors, at a power of 22 watts. The lamps heat up very weakly, and therefore their design is extremely close to simple halogen products due to a smaller radiator.
pros
- the body is made of aluminum alloy;
- durability (up to 20 thousand hours);
- operation at temperatures from -40 to +85 degrees is allowed;
- the waterproof indicator of the model is IP68.
Minuses
- the light beam needs tuning.
# 1. Cyclone Type-21 Dual H7
The luminous flux of this model is no worse than xenon thanks to the use of CSP LEDs, manufactured using the latest technologies. The product is capable of delivering 4500 lumens.
Note! The LEDs are located here in the same way as incandescent filaments in halogens, and therefore the model is a worthy replacement for a regular lamp.
pros
- radiator material - aluminum used in the aviation industry;
- durability (up to 30 thousand hours);
- mains voltage - from 12 V to 24 V (which means that the model is suitable for trucks);
- vibration resistance.
Minuses
- such lamps are quite expensive.
TOP-3 xenon models in the H7 base
In such lamps, the bulb is filled with an inert gas, and the light is emitted due to the electric discharge between the electrodes (an arc is created), rather than heating the filaments.
# 3. PROLight Slim H7 5000K Kit
The model with a high light temperature (equal to 5000 K) produces white light, almost indistinguishable from daylight. Thanks to this, driving the car is quite comfortable, and the headlights do not dazzle the drivers of oncoming cars. With the help of PROLight Slim, you can not only replace standard lamps - these products can be installed instead of any model without re-equipping the headlights.
pros
- modern slim-block ignition;
- the ability to operate at temperatures from -40 to +105 degrees;
- the current regulator is already built in.
Minuses
- you need to install additional equipment.
# 2. InfoLight H7 +50 4300K
Due to the increased heat transfer, the driver will be able to concentrate on the way, clearly see objects from a long distance. With prolonged heating, the lamp does not deform, its geometry is not distorted, and all thanks to the ceramic holder.
pros
- white and clear light (4300 K);
- vibration resistance;
- increased luminous flux by 50 percent.
Minuses
- Ignition unit required.
# 1. Winso Slim Ballast Н7 5000K Kit
The power consumption of these xenon lamps is 35 W, and the power is supplied from a 12 V network. The country of origin is Poland. In addition to the lamps themselves, the kit includes wires for connecting to relays and ballasts. The light is white, does not dazzle oncoming traffic participants and does not tire the eyes.
pros
- high color temperature (equal to 5000 K);
- short circuit protection;
- the current regulator is already built in.
Minuses
- such lamps are quite expensive.
GOST requirements for low beam lamps
When choosing such lamps, the current quality standards should also be taken into account. So, according to GOST, the following requirements are put forward for H7 lamps:
- permissible luminous flux - from 1350 lm to 1650 lm;
- the power should be no more than 58 watts. Otherwise, if the power is higher, the electrical equipment system of the machine may be damaged.
Secrets of choosing lamps in the H7 base
There are several of them, but the most important, perhaps, is still power.
What should be the power?
All products with an H7 base, despite the design differences and different manufacturing technologies, have one standard power - 55 watts. If the package indicates a different power, then it is better to pay attention to a different model: fans of such experiments often had to see how the headlight or electrical wiring overheats, the lamp itself “spreads” ... In a word, the power should be the same as recommended by car manufacturers.
Colour temperature
The above-mentioned characteristic indicating the shade of light that is emitted by the product without the use of colored bulbs or filters. As a rule, this parameter should be between 4000 K and 6500 K (Kelvin). Such a temperature is considered a reference, it is familiar to the eyes, it loads them less. But during rain, for example, such light is strongly reflected from water droplets, which means that visibility deteriorates.
Note! If the temperature indicated by the manufacturer is below 3000 K, then the light of the lamp is yellow. In bad weather, of course, this is effective, but under normal conditions it is very inconvenient.
Lifetime
It is important to remember here that the higher the voltage, the shorter the service life of the product. For example, if the voltage is increased by 5 percent, then the service life will be reduced by about 40 percent! In the reverse order, that is, to decrease the voltage, it works the same way. Of course, the higher the voltage, the greater the luminous flux.
Which H7 bulbs are not worth buying?
These are the products mentioned at the beginning of the article with instructions such as "Offroad use only" either "Not for use in Europe"... In simple terms, they shine so "crookedly" that the manufacturers themselves talk about the impossibility of using them (legally) on public roads. What is characteristic, the violation of light distribution, most likely, will be located precisely in the area of the oncoming lane.