Electric boiler STOUT SEB-0001-000007 7 kW single-circuit
Briefly about the product
- heating boiler type: electric
- number of circuits: single circuit
- Max. thermal power 7 kW
- heated area 70 m2
- placement: wall-mounted
- mains voltage: single-phase / three-phase
- control: electronic
- built-in circulation pump
- built-in expansion tank
Electric boiler 7 kW STOUT SEB-0001-000007 is intended for heating residential and industrial premises up to 70 sq. m.
The device operates in six main modes: "Room", "Heating", "Weather-dependent", "DHW", "Summer", "Cascade".
Thanks to the functional control panel, the equipment is easy to operate, configure and maintain.
The model is equipped with sensors for room and outdoor temperatures, which ensure complete readiness for work.
Equipment*
- STOUT device;
- Air temperature sensor - 2 pieces;
- Operation manual LITYA.681936.063RE;
- Fastener kit;
- Repair kit-ring 045-053-46-2-4 GOST 9833-73;
- Fuse 3.15 A - 5 pieces;
- Screwdriver 95x2x0.3;
- Package.
Packaged goods parameters
- Item Unit: Piece
- Weight, kg:30,60
- Length, mm:470
- Width, mm:860
- Height, mm:340
AdvantagesSTOUT 7 kW
- Power by switching steps - 2.3 / 4.7 / 7 kW;
- The minimum temperature in the DHW circuit is 10 degrees;
- The maximum temperature in the DHW circuit is 85 degrees;
- The minimum temperature in the heating circuit is 10 degrees;
- The maximum temperature in the heating circuit is 85 degrees;
- Steel heat exchanger;
- Expansion tank with a volume of 12 liters;
- The principle of operation of the boiler - heating element;
- Rated frequency - 50 ± 1 Hz;
- The measurement range of the coolant temperature is from minus 55 to plus 95 degrees;
- Air temperature measurement range - from minus 55 to plus 65 degrees;
- Working pressure in the heating system - from 0.07 to 0.29 MPa;
- Pressure measurement range - from 0 to 0.4 MPa;
- The volume of the built-in pneumohydroaccumulator (expansomat) - 12;
- The preliminary pressure of the expansomat is 0.15 MPa;
- The maximum pressure for crimping the system is 0.43 MPa;
- Safety valve actuation pressure 0.4 ± 0.03 MPa;
- Electricity consumption for 1 hour of operation of the device - no more than 7.35 kW * h;
- Relay sticking protection;
- Freeze protection;
- Indication of errors reporting malfunctions in the operation of the boiler;
- Heat insulation of the heat exchanger;
- Magnetic switch;
- Low noise level during operation;
- Convenient water connection from below - external thread G3 / 4;
- Possibility of preparing hot water in any operating mode of the device (with an indirect water heater connected).
