6 best blowtorches
Soldering lamps, unlike soldering irons, are not designed for delicate work with devices and electronics. These are powerful non-volatile devices - heating is created by the combustion of liquid fuel or gas. Since the heating temperature in many models exceeds 1000˚C, a blowtorch can melt materials of increased hardness.
Before buying, you need to know exactly for what purpose the equipment is being purchased. There are a lot of offers in stores - on gasoline, on gas. Gasoline gives a higher temperature, but is quickly consumed, therefore liquid fuel burners are equipped with spacious and rather heavy fuel cylinders. Blowtorches are much lighter.
If you need a budget option, you can take a closer look at domestic brands. Many of them are as good as imported brands. For example, for "amateur" work, an inexpensive, but not bad gasoline "Zubr" is quite suitable. If there is a lot of work ahead, power and increased functionality of the blowtorch are required, it is better to opt for a more powerful device like the Dremel Versaflame, which runs on gas. It will cost several times more, but the funds spent will fully justify.
The best gasoline blowtorches
Gasoline models create an open flame to heat and melt various materials. Such blowtorches are used for large-scale work - heating frozen pipes, roofing work associated with the melting of roofing material. Sometimes they are used by tourists to cook lunch in the field, truckers to warm up the brake system.
4 SIBRETECH 91442
High quality, reliable blowtorch at a low cost. It can run on any brand of gasoline, except for leaded. Despite the fact that the capacity of the tank is 1.5 liters, it is better not to fill it completely - maximum 1.1 liters. Fuel is consumed economically, one refueling is enough for an hour of work. The handle is steel, simple, but quite comfortable.
The reviews contain different information. Of the pluses, users note the ease of adjusting the fuel supply, of the minuses - the rapid clogging of the nozzle. It is advisable to clean it after each use.
3 Bars 91452
The lamp heats up very quickly, gives a powerful, stable flame - you can safely work in windy weather. Any model has a clogged nozzle. In this case, this is not a problem - the nozzle is located outside, it can be conveniently unscrewed for cleaning. The metal of the burner is quite thick - you can count on a long service life.
The package includes a repair kit. For convenience, it is hidden in the handle. The device can run on 92 and 95 gasoline. The scope is wide - it can be used for repair work, household purposes, for soldering, heat treatment of parts. The disadvantage of the lamp is that it is difficult to adjust the flame power.
2 Bison Expert SAMOTLOR SM-15, with cast-iron ejector
The petrol blowtorch from the domestic brand "Zubr" is very popular. Users are attracted by the low price and good quality. Many buy it because of the company - "Zubr" is a proven manufacturer of various quality tools and equipment. It has a relatively small size, but one filling is enough for an hour of operation. Volume - 1.5 liters. Important advantages are the cast-iron ejector and the presence of a protective casing that prevents the flame from blowing out when working outdoors in windy weather. At the bottom of the handle there is a compartment for a repair kit, closed with a cork - this is also convenient.
The lamp can run on unleaded gasoline 92 or 95. The design is simple, safe and reliable. There are different reviews, but more often users note a good heating rate, low weight even when filled, and the presence of a repair kit.Of the minuses - the nozzle is often clogged, it has to be cleaned with a needle in the periods between work.
1 Motor Sich LP-2M
The first place in the rating is taken by the time-tested Motor Sich LP-2M unit. This gasoline soldering iron has been produced since the times of the USSR. Heavy, simple design, reliable and inexpensive unit. The head is made not of cast iron, but of thin-walled metal - this is both an advantage and a disadvantage at the same time. The plus is that the heating time is reduced, the minus - the head will burn out faster. The tank is large, two-liter. According to user reviews, one refueling is enough for a long time, even with a strong flame and a high combustion temperature.
The lamp is used for thermal, soldering work, during which open heating is allowed. It can be used for domestic purposes, at work and on the road. This model is often chosen by tourists for heating and cooking. But on the forums they sometimes write that there are small factory flaws. For example, a slightly crooked head arrangement.
Best gas blowtorches
Compared to gasoline models, gas appliances are more versatile. They can work with a hot working part, with an open flame and heated air. For this, a special nozzle and a flame arrester are included in the package. The scope of use is much wider - it is used for repairing plastic elements, burning wood, performing heat shrinking works, defrosting locks, removing paints and varnishes.
2 Kemper 1060 KIT
The device is made in Italy of high quality, reliable, looks good, fits very comfortably in the hand. Feature - power and stability of the flame, regardless of the position of the switched on device. It ignites easily, there is a piezo ignition, heats up quickly, the temperature is regulated by a special ring to change the air intake. But, according to reviews, this ring becomes hot during operation - you just can't touch it with your hands, only with gloves.
The lamp fits threaded valve cylinders, but an adapter can be purchased to use it with a collet mount. A big plus is gas preheating. A very good model. The only small drawback is that the flame is stable only with medium and large flame, with low fire the burner strives to go out all the time.
1 DREMEL Versaflame 2200-4
One of the best options for multifunctional stationary blowtorches. You can use an open flame with a catalyst and a soldering nozzle. A nice feature is an interesting design and wide functionality. Powered by liquefied butane gas. For convenience, the model is equipped with a piezo ignition. It is used for welding, soldering, heat shrinking. With a reservoir capacity of 22 grams, the device operates in intensive mode for about 75 minutes.
There are many useful options - child lock, removable foot for stationary work, flame level lock, temperature mode selection. The kit includes several nozzles - for soldering, torch extension. In terms of functionality, the lamp resembles a professional model. Users note the ease of recharging, very short heating time, and ease of use. Of the minuses, they name only a fairly high cost.
