10 best construction mixers

Modern construction cannot be imagined without the use of all kinds of technological mixtures. Concrete, lime mortars, plasters, groutings, mastics, paints, varnishes - they all contain many components, and therefore require thorough mixing both before use and during the process. Someone for this is trying to do the old-fashioned way with an old trough and a wooden spatula, someone uses a drill or perforator. But why waste a huge amount of time and effort, risk a tool, using it for other purposes, if in a matter of minutes you can get the same and even better result just by using a hand-held construction mixer? And this device is quite inexpensive, and the assortment is excellent - foreign and domestic manufacturers are not trying in vain. It remains only to study the rating of the best models - and go ahead, for an irreplaceable assistant!

TOP 10 best construction mixers

10 STANLEY SDR1400

In appearance, no one will classify a mixer-drill from the American company "Stanley" as a professional or at least semi-professional class: small, bright, with rounded handle shapes and a convenient arrangement of control buttons. The manufacturer obviously worked hard on the ergonomics, but the performance characteristics of someone are initially in doubt. However, upon closer examination, it turns out that in fact this "baby" is a serious and reliable building tool.

Weighing only 3.5 kg, the device produces an enviable torque of 80 N ∙ m and allows you to adjust the rotational speed of 480/800 rpm. The soft start system ensures an accurate start and protects the device from overload. The 1.4 kW motor, together with a complex gearbox, does not overheat during a continuous mixing cycle for many hours, the maximum diameter of the mixer can reach 140 mm, which is quite satisfactory for most builders.

9 ELITECH MS 1600 / 2ED

The flagship of the line of construction mixers from the Elitech company, the MS-1600 / 2ED model, is equipped accordingly: a 1.6-kilowatt motor producing up to 800 rpm on two spindles, a gearbox with a metal body and strong attachments coated with zinc. Unlike most machines with threaded beaters, this machine has a keyless chuck, which saves time and does not require wrenches on hand to tighten.

The majority of users were satisfied with their purchase after several weeks of operation. Among its advantages, they name an adequate cost, the ability to work at low revs at high torque and a soft start button, and the disadvantages include difficulties with the purchase of consumables, decent noise performance and the smell of plastic in the first days of running in.

8 Caliber ERMD-1600 / 2E

The model is the most high-speed and powerful mixer in our ranking. Due to the increased power of the electric motor (1.6 kW) and the twin-screw arrangement, it delivers a productivity 2 times higher than devices with 1 nozzle. In addition, rotating in different directions, the attachments stabilize the position of the instrument. Considering that it weighs more than 8 kg, such a solution allows you to hold the device in your hands for a long time and comfortably. It is important that the motor has double insulation in order to protect it from touching live elements.

The electric mixer is equipped with a 2-speed gearbox, which provides step-by-step speed control 0-560 / 0-750. But even at the first speed, the beaters rotate quickly enough, which is undesirable for preparing concrete, but it is optimal for stirring gypsum plaster.As for the mechanical reliability, opinions in the reviews were divided: some users believe that the machine is strong and can withstand even careless handling, while others blame the quick failure of the attachments and their absence on sale.

7 BISON MR-1050-1

When the deadlines are running out, construction equipment is worn out, and if it fails, the work of the entire team suffers. Two working speeds (500 and 700 rpm) and built-in electronics that monitor and neutralize any changes in load ensure precise mixer adjustment for specific tasks. The handheld device is compact enough, weighing 4.7 kg, and the handles are covered with anti-slip material, so it is very easy to work with it.

In the reviews about "Zubr" they say that it is very hardy, "drags" any mixture, for several months of active use only carbon brushes are subject to replacement, for easier access to which the developers have provided a quick-detachable service cover. A replaceable metal nozzle in the form of a spiral 59 mm long is included in the kit, if necessary, it can be easily replaced, since the fastening thread on the spindle is standard (M14).

6 Fiolent MD1-11E

Judging by the reviews, most of the repair and construction teams work with Fiolent. They call MD1-11E a simple workhorse without serious bells and whistles. The model is capable of surprising an experienced builder only with the ratio of price and technical characteristics, but you can not expect unpleasant surprises from it. Everything in it is sound and solid, as befits a professional tool: a high-torque 1.1 kW motor, a well-cooled aluminum gear case, a monumental metal handle-bracket with a comfortable grip. And there is also an electronic speed control for safe and comfortable work with different materials - from liquid varnishes to thick concrete.

Not all descriptions indicate that the device belongs to the category of mixer-drills, and its scope is wider than a conventional mixer. When installing a drill chuck with an adapter (it is better to check their availability in the basic configuration at the place of purchase), you can safely drill holes with a diameter of up to 40 mm (wood) and 16 mm (metal), and the same electronics is responsible for the optimal drilling mode. To summarize, the domestically produced unit really turned out to be successful - it is inexpensive, reliable and versatile.

5 Metabo RWE 1020

This mixer model from the renowned manufacturer Metabowerke implements the unique Vario-Tacho-Constamatic speed control technology. With an increase in the load on the hand tool, it allows you to maintain a constant rotation speed of the nozzle, thereby significantly increasing the efficiency of work and preventing overheating. Another sensible solution is that the outlet of the side supply cable is protected in such a way as to eliminate the risk of its breakage and failure.

The belonging of the device to the class of professionals is read by many important details: an aluminum radiator, an ergonomic handle position, rubberized corners, dust protection for the speed switch, and a solid 36-month warranty. A smooth start-up contributes to a minimum level of dustiness in the environment and the splashing of liquids during the mixing process. A wide range of additional equipment provides universal use of the mixer in work with any materials. It is a pity that there are not so many reviews on this car - apparently, after all, its cost seems to be overpriced to potential buyers.

4 Makita UT1200

Fans of the Makita brand often complain that its devices are flawless in everything except the price, which is why they have to buy from other companies. But in the case of the UT1200 mixer, there is no need to make any compromises: it is not much more expensive than its analogues, but the Japanese approach to development and German quality of production are felt in all its details.The neatly assembled, compact unit fits comfortably in the palm of your hand and is ready to tirelessly stir mortars of any density, except perhaps for concrete and bitumen mastic.

The power of the electric motor is 960 W, and the reliable gearbox significantly reduces the speed and transfers energy to the spindle in the form of a torque of 25 N ∙ m (the value is determined by calculation). At idle, 590 rpm is available, under load - 360 rpm. - what is needed for the preparation of mixtures weighing up to 30 kg. The extensive geography of branded service centers and a conscientious attitude to warranty obligations deserve special praise.

3 Hitachi UM16VST

The Hitachi company appeared in 1910, and in 2019 became the largest global conglomerate of 1,100 companies, one of which - Hitachi Koki - has been producing manual and automatic power tools for over 60 years. Almost the entire assortment has an excellent reputation, and it is at least prestigious for builders to use this at work. The devices are also praised for their "survivability" - some reviews on a well-known video hosting site are 5-6 years old, and the author's comments and new videos under them confirm that the devices are actively used to this day.

The UM16VST mixer with a 1.5 kW electric motor is no exception. In addition to him, the line also has a junior version with a power of 1.1 kW, ideal for performing household tasks. Both models are made thoroughly, both cope with mixing all types of building mixtures - from plaster to concrete, and both are equipped with a set of spare brushes that many craftsmen did not even need in 3-4 years. The device is unambiguously recommended for purchase, praised for the length and quality of the supply cable, the ability to adjust first by a stepwise method (2 speeds), and then twist to the desired speed with the wheel.

2 Hammer MXR1400

With such a powerful machine as the "Hammer", repair and construction work is accelerated and facilitated at times: it is a pleasure to fill the screed with it. There is nothing to say about dry mixes: he mixes several bags at once with one batch. This is not surprising - with a 1.4 kW engine and a steel gearbox, the operation of the unit is unlimited and in this it really resembles the army SUV of the same name.

It has two speeds, as befits a professional mixer, designed for all types of materials - from 0 to 430 rpm. and from 0 to 700 rpm. There is also an electronic speed limiter, which prevents the solution from splashing, and during prolonged work, you can resort to fixing the switch. The set includes a 140 mm whisk with an M14 extension and 2 wrenches. In general, a hand mixer is good in every respect, and its price is justified by the set of characteristics.

1 Interskol KM-60 / 1000E

This is one of those mixers that is equally well suited for the preparation of liquid and viscous mortars for both domestic repairs and professional construction. It is powerful enough - the power consumption of the engine is 1.05 kW, which indicates the high productivity of the apparatus and the ability to prepare viscous solutions in fairly large volumes. Thus, the masters declare that they mix 500 liters of concrete in portions of 60 - 90 liters, and in this mode their tool has been working for several years. Many of them have given up on concrete mixers, especially in multi-storey construction.

The technique is made conscientiously, the materials used - metal and plastic - correspond to the GOSTs declared by the manufacturer. The design has a well thought out grip - two full-fledged mixing handles. Thanks to them, as well as the fixation of the power button, the hands practically do not get tired when mixing large volumes. The model is often compared with the more promoted, and less affordable "Hitachi" and "Metabo" and they claim that it is not inferior to them, and the prepared solution meets all building requirements regarding mass homogeneity.