10 best remedies for mold on walls
Mold on the walls is a microscopic fungus that harms interior items, the health of the residents of the room. A room with a fungus becomes dangerous for living due to the spores of microorganisms in the air and inhaled into the body. There they settle, causing respiratory tract infections. The systematic intake of fungal spores into the body, sharply weakens the immune system, contributes to the appearance of signs of asthma, suffocation, heart palpitations. It is not always possible to establish a connection between a weak immunity and a fungus on the walls, since patients do not attach importance to this, and doctors do not ask such questions. Mold spreads to furniture, clothing, carpets. You have to spend money on new things, to clean more often.
Fighting the fungus is not easy, but the chemical industry offers many remedies to successfully tackle this problem. The choice is preceded by the identification of the causes of this phenomenon. The main ones are: high humidity, insufficient ventilation, the presence of voids in the walls, sudden temperature changes inside and outside the room. After identifying the cause, they select a means to destroy blackness from surfaces. To improve ventilation, it is enough to purchase a forced air exchange unit, you can close up voids with special building materials, but not all causes can be eliminated by mechanical means. There are chemicals, the best of which are listed below.
Top 10 best remedies for mold on walls
10 Biotol spray
One of the best antibacterial agents for mildew and mildew on mineral, wood and other surfaces. The composition does not contain heavy metals, mercury, chlorine, therefore, there is a slightly perceptible smell of a chemical agent. Recommended for wet rooms, building facades, basements, balconies, roofs. Suitable for disinfection works on architectural monuments, memorial plates and fences, used for restoration. The material of the processed plane does not matter.
Severely infected walls are recommended to be cleaned before applying the product with a brush or scraper. This must be done very carefully so as not to spread the infection to clean areas. It is best to spray the drug onto the lesion site from a distance of 20-30 cm, without getting on closely spaced objects, which must first be covered with a protective film. The applied preparation is left for 1-2 days, the residues of dirt are cleaned with a brush and reapplied in advanced cases. After use, it is advised to rinse tools under running water.
9 Belinka
The drug is a broad spectrum of action. Effectively removes various types of wall fungi and mold. Approved for use in rooms with high humidity. It helps to disinfect walls, floors, ceilings, attics, plinths from pathogenic microorganisms in the shortest possible time. Designed mainly for concrete, plaster surfaces. The absence of bleaching components in the composition allows it to be used on multi-colored materials.
Processing begins with the preparation of a solution at a concentration of 1: 4. The preparation is sprayed or applied with a brush at a temperature of +5 degrees and no more than 80% humidity. Removal of dried dirt is required only after the procedure. This is best done with hot water under high pressure. A large area of contamination is the basis for reprocessing. After drying, apply a primer and then paint.
8 Neomid Bio Repair
One of the best disinfectants for the prevention and destruction of mold and mildew from indoor surfaces. The formula of the drug is represented by safe ingredients, which increases its popularity. It is used in the construction of buildings to prevent the appearance of pollution.For the destruction of an existing lesion, it is produced in two types - a concentrated and a ready-made solution. The first is used in a diluted form in difficult cases and over a large lesion area. In domestic cases, a ready-made solution is used. Both effectively eliminate the problem on mineral surfaces.
The work is best done at a low temperature - from +5 degrees. The surface is irrigated from a short distance, left for 2 hours and all dirt is carefully removed with a scraper, without scratching the treated area. Repeat the procedure if necessary. The cleaned planes must not be left under atmospheric precipitation. We must try to find such a time for work so that for at least 12 hours the temperature is kept from 16 to 20 degrees, and the humidity is not higher than 60%. The whole process is carried out in a well-ventilated building. Freezing is allowed no more than 5 times.
7 Abedis 06
It is used inside and outside the building, in free-standing street gazebos, in greenhouses, on garden paths made of different materials. The drug is considered a universal antiseptic. It is made in the form of an emulsion. Recommended as a prophylactic agent against fungal microorganisms and mold. Effectively removes existing organic plaque. Abedis is advised to be used during construction as an additive to paints and mortars. Let's be admitted to work in childcare facilities. The preparation is based on guanidine, which is one of the most powerful antiseptics, and water as a solvent.
Before starting work, the agent is diluted with water in a ratio of 1: 2 and the walls are completely treated, regardless of the degree of fungal infection. After that, leave to dry for a day and wash off with water. After drying, repeat if necessary after 2.5 days. Work is carried out in protective equipment. The drug is stored after opening for 36 months. Buyers report in reviews about the long-term effect of the antiseptic.
6 Olympus stop mold
Designed for rooms with high air humidity. Effectively removes mold from wood, tiles, stone, brick, plaster, concrete. Indicated for use on facades, roofs of houses, basements. Protects and prevents destruction, bio-damage of any surfaces. The composition does not contain harmful volatile formations, so the drug is considered one of the safest for people and pets. The quality and color of the walls is not affected. Provides long-term protection against fungus, mildew, moss and lichens.
Before applying the drug, it is recommended to remove dirt in the form of dust, fungal and moldy deposits. Check for peeling old paint, putty and other materials. The surface must be free of coarse debris. You can distribute the product evenly with a roller, brush, spray. The best result is achieved after applying 2 layers of the composition. Spray at a distance of 20 cm from the surface. The temperature at the time of work should not fall below +5 degrees. The Olympus stop is sold ready-to-use. At a temperature of +20 degrees during work, the layers dry out in 1 day, after which decoration can be carried out.
5 AMSS
Highly effective agent against mold and mildew plaque. It is applied on surfaces of different qualities. Suitable for use in kitchens, bathrooms, balconies, building façades and roofs. Does not change the quality of the material on which it is applied, therefore it is allowed for use on decorative objects. The agent has the strongest action against bacteria, without chlorine in its composition. It can be used for prophylaxis during construction and finishing works. This will help to avoid the appearance of dirt on the walls as a result.
The built-in spray gun helps to conveniently use the product when applied to surfaces of different qualities. Before starting work, you must wear protective goggles and gloves to avoid contact with the drug.Spray should be done at a distance of 0.2 m from the wall until it is completely saturated with it. Leave for 3 days and then, without rinsing, repeat the procedure if there are traces of contamination. Remaining on the wall can be washed off with water. The best place to store it is in a dark and cold room. Transport at low temperatures and tightly closed. Shelf life from 5 years.
4 Fongifluid Alps
The fungicide contains components that reinforce each other in the fight against mold and mildew. It is considered the most convenient tool for work, it is sold ready-made, does not require additional preparations. It is applied to surfaces of different qualities and textures. To increase the effectiveness of the interaction of the drug with the surface, the manufacturer advises to pre-smooth out roughness, irregularities in order to increase the contact area.
Walls of any material are subject to cleaning, since the product carefully processes, does not leave streaks, does not change the degree of staining, shine. The manufacturer's recommended consumption is 1 liter per 5 m2. It can be applied twice in case of severe damage. After the first treatment, it is necessary to leave the fungicide for 4-6 days until it dries completely. At the buyer's discretion, the procedure can be repeated. Can be used to prevent the appearance of mold and mildew.
3 Sazi Wepost Luxe
An effective antiseptic agent against fungus, mold on surfaces inside and outside the house. It is highly recommended for complex action in tandem with a water repellent agent, which provides enhanced surface protection from external factors. After application, an invisible layer of the preparation remains on the wall, which serves as an obstacle to moisture penetration. Materials processed by it increase their waterproofing characteristics.
At the first stage, the walls are treated with an antiseptic agent included in the composition. In case of severe damage, the agent should be reapplied to the area affected by mold. After drying, Sazi is applied to it, leave it for the amount of time indicated in the instructions, and clean the residues. At the final stage, a water repellent is applied, which reliably protects against dust, moisture and preserves natural air exchange. According to consumer reviews, the tool helps to cope with the problem for a long time.
2 Dali
It is considered the best universal drug against mold, fungus, moss. They should process surfaces made of brick, concrete, wood, drywall. Before processing, the plaster can not be removed from the walls, the product penetrates through it. Dali is allowed to be applied to interior and exterior walls. Before painting, the walls are pre-impregnated with an antiseptic. The composition does not contain chlorine, which makes the product safe for allergy sufferers and people prone to diseases of the upper respiratory tract. The drug is characterized by high penetrating power, fast absorption and does not change the characteristics of the materials to which it is applied.
It is recommended to process a dry surface with a brush, roller, spray. The temperature at the time of processing should not be lower than +5 degrees. If the surfaces are severely affected by mold, it is necessary to carry out mechanical cleaning, rinse with water, and dry thoroughly. After 24-48 hours, brush off remaining dirt. It takes a day until it dries completely. It is recommended to transport and store the drug at a temperature not lower than 0 and not higher than 40 degrees. According to consumer reviews, the product has a pungent chemical smell, so it is necessary to work in a respirator. Its shelf life is 24 months.
1 Savo
Convenient packaging of the drug allows the most efficient processing of surfaces of different quality and curvature. Approved for use to prevent mold formation. The active ingredient is sodium hypochlorite. It copes well with fungal contamination in saunas, swimming pools, basements, attics.No additional cleaning of contaminated surfaces is required before application. The main advantage of the drug is the complete elimination of the problem.
To calculate the amount of funds on all surfaces, it is assumed that 50 mg is required for 1 m2 of area. Spraying is carried out no more than 10 cm from the surface, carefully processing cracks, thresholds, bulges, pits. Leave for 20-30 minutes and wash off with water. After drying, a decision is made on the need for re-processing. Consumer reviews say that a two-time procedure is enough to get rid of mold forever.
