Purpose of polishing machines - surface treatment and giving a presentation of products made of metal, wood and any other material that is amenable to abrasive action. Most often, this equipment is used at the final stage of preparing the paintwork of the car body.

Our review presents the best professional and amateur polishing machines that are freely available on the domestic market. The rating is based on the technical parameters of the models and the opinions of surface treatment specialists about their operation. Also, the assessment was influenced by the reviews of the owners who have invaluable experience in using the tool in various conditions.

TOP 10 best polishing machines

10 PATRIOT AG 180

A quick glance at the PATRIOT AG 180 polishing machine is enough to realize that the build quality and the materials used are beyond doubt. Accuracy of fitting parts, smooth start-up and absence of unnecessary noise during operation - these are the impressions the owners share in their reviews. Regardless of the intensity of the force with which the disc is pressed against the work surface, the tool keeps the rotational speed unchanged.

Some users note that the speed regulator does not work quite correctly - the minimum revolutions are two times higher than the 1000 disc revolutions per minute announced by the manufacturer. Given the fact that the intensity under load remains unchanged, the car body should be polished carefully so as not to overheat the lacquer layer. When processing other parts made of metal or wood (plastic), this factor is not so significant and does not have a particular effect on the quality of work. In addition, the additional handle of the tool has the most comfortable and ergonomic design, which makes it much easier to carry out large volumes of work with the PATRIOT AG 180.

9 SPECIAL BMP-1200

The polishing machine SPETS BMP-1200 due to its light weight and additional ring handle is very simple and convenient to use. Designed to handle a wide variety of materials, differing in composition and density, this model is endowed with the ability to adjust the speed, in the available range from 800 to 4200 rpm. This angle grinder is powered by a 1250 W brushed motor, which is also equipped with a brake function.

To carry out polishing work with this tool, it is necessary to use a wheel or sanding felt discs with a diameter of 180 cm. An optional fur attachment is provided for the model, which is excellent for the final stage of surface treatment. The advantages of the machine SPETS BMP-1200, users in their reviews refer to a long service life, ease of management and the quality of work performed. Among the shortcomings, the lack of a smooth start is noted, which is more preferable for manipulating abrasive substances.

8 BISON ZPM-240

ZUBR ZPM-240 belongs to the eccentric type of polishing machines that best imitate manual processing. Thanks to this nature of the action, the ideal surface smoothness is ensured in a shorter period of time. A distinctive feature of this model is the large area of ​​the working circle, due to which the pressure on the surface is reduced. Comfortable grips and a lockable start button also contribute to operator comfort during work.

The use of the ZUBR ZPM-240 grinding machine contributes to an economical consumption of polish. The special water-repellent treatment of the top layer of the plate does not allow it to be absorbed, and all the liquid is used as intended.The motor of this tool provides rotation at a speed of 3200 rpm, while it is protected from overheating by forced air circulation. Despite the absence of various additional functions, this machine does an excellent job with the tasks set, which is confirmed by the positive reviews of the owners, who also speak of the best ratio of price and quality.

7 Huberth RP207171-21

The eccentric size of this polishing machine is 21 mm, which allows for efficient use of the tool, both when processing car body and when preparing large surfaces. Reinforced electrical insulation and built-in forced cooling fan make the Huberth RP207171-21 the most efficient piece of equipment for continuous industrial grinding jobs.

The toe of the machine is rubberized and is very convenient for adjusting the degree of pressure on the polishing unit. The handle is also coated to reduce vibration. In their reviews, the owners express their complete satisfaction with the performance of the device. The high reliability of the components for assembling the Huberth RP207171-21 and the quite reasonable price, which many users consider the most fair, are especially noted.

6 Status PA180M

Despite the heaviest weight in the rating (3.6 kg), the Status PA180M polisher has a number of advantages that allow the equipment to compete successfully with more expensive counterparts. The grinder perfectly holds low revs at different loads, which makes this tool in demand when processing engine body parts. The design feature allows the equipment to be operated in continuous mode - Status PA180M practically does not heat up.

In their reviews, the owners note the accuracy of rotation adjustment, high-quality assembly and satisfactory reliability of the unit. In addition, against the background of these characteristics, the price looks quite attractive both for professional craftsmen and for owners who choose a tool for individual use. The polisher is ready to get started right away, as the kit includes a set of abrasive papers of different grain sizes and a polishing wool pad for finishing.

5 Makita SA7000C

One of the most reliable and unpretentious tools is perfect for various areas of work - from polishing a car to rough surface treatment (metal structures, wooden facade elements, door leaves, etc.). The grinder has a well thought-out body that allows you to easily change the motor brushes - with large volumes, the procedure is quite frequent.

The polishing unit does an excellent job with a large amount of work. With prolonged continuous grinding, it does not heat up and does not lose its basic parameters at all, maintaining the stability of the rotation of the working disk even with very strong pressure. Convenient functionality at low speeds is also noted - in addition to adjustment, the intensity of work can be further reduced by controlling the force of pressing the trigger. Among the shortcomings, the lack of a dust collector and an ergonomic U-shaped handle is indicated, with which it is much easier to cope with a decent weight of the polishing machine. With continuous operation, this is what the Makita SA7000C lacks the most.

4 RYOBI R18B-0

A feature of this grinder is its complete autonomy - thanks to the battery (purchased separately), the RYOBI R18B-0 tool is convenient to use, since the operator's movement is not limited by the length of the wire, and the owner can polish the car in any place convenient for this. As for the power of the cordless tool, the grinding disc develops up to 2.5 thousand revolutions - quite enough for surface treatment.

At the same time, the use of modern types of batteries (Li-ion) will not make the model particularly heavy, so in this case it is quite comfortable to operate it for a long time. The owners' reviews also positively note the quality of the orbital machine's work - thanks to the eccentric, the reciprocating motion of the polishing disc allows you to effectively perform fine processing of the paint layer, including on convex (concave) areas. True, the eccentric stroke in this grinder is not adjustable, so it is not possible to customize the RYOBI R18B-0 for a specific task. The presence of a cloth and woolen disc for fine polishing in the kit was noted by some users as another of the advantages of the model.

3 Interskol UPM-180 / 1300EM

Reliable polishing machine Interskol UPM-180 / 1300EM has a starting current limitation. As a result, work begins without jerks, and the speed stabilization system allows you to maintain the intensity of rotation with stronger pressure of the wheel on the surface. A sufficiently noticeable weight during prolonged work leads to rapid fatigue of the hands, however, this, rather, is a feature of all polishing work.

The sheet (up to 180 mm in diameter) is fastened for surface treatment with Velcro - the fastest and most efficient way. In the reviews of most of the owners, they are satisfied with the performance of the tool and its cost, which looks more advantageous against the background of similar models from other brands. The presence of speed control and high resistance to intensive use is also positively noted - you can work with the Interskol UPM-180 / 1300EM polishing machine for hours.

2 AEG PE 150

If you need to regularly polish wood, metal, ceramics, etc., you should pay attention to the model of the AEG PE 150 grinder. Its convenient design with an additional handle that can be installed on either side of the case, depending on individual needs, significantly increases productivity and has a positive effect on the quality of the work performed. The presence of electrical speed control allows you to select the most efficient processing mode for a particular material.

For the gearbox installed in the AEG PE 150 polishing machine, a special cover is provided, which provides reliable protection for the operator from accidental contact, and the tool itself from mechanical damage. The powerful motor of this equipment is equipped with built-in ventilation and an emergency shutdown in case of abrasion of the nozzle, which makes it impossible for the grinder to overheat. In the reviews, users note the high build quality, compact design and better retention of revolutions under any load.

1 DeWALT DWP849X

A reliable and very convenient polishing tool compares favorably with its closest competitors in several respects at once. Smooth motor starting and overload protection ensure high durability of the DeWALT DWP849X. The build quality and reliability of component parts allows the manufacturer to take on a warranty for the first 3 years. This is the best evidence and confirmation of the high performance of the tool.

The polishing machine also has a speed control and a speed stabilization system. The outer side of the disc attachment (a maximum diameter of 230 mm is allowed, but a smaller work surface can be installed if required) is covered with Velcro to hold removable abrasive sheets. There are practically no negative aspects in the reviews of the owners, with the exception of the only aspect - a very high price. In fairness, it should be noted that although the DeWALT DWP849X is one of the most expensive grinders in this rating, its cost is fully justified by its high performance and long service life.