10 best nail guns
The modern tool is designed to remove the high workload from a person, and at the same time to increase the work capacity of a specialist several times. In the case of a nail gun, this indicator of efficiency is without a doubt one of the highest. Installation of profiles for gypsum plasterboard systems, soft roofs, furniture manufacturing and other types of work with this device proceed more intensively and with less energy.
Different types of nail tools, pins or special staples take part in the review. The best models of pneumatic, electric or gas guns are presented in their respective categories. The rating position of the models is based on the characteristics of the equipment, its operating parameters and the opinions of specialists who use nailing units in their work.
Best pneumatic nailer guns
This equipment requires a compressor and a long compressed air hose to operate. The models differ in affordable cost and structural reliability, however, they are limited in use by the length of the air supply hose. The category features the best pneumatic driven nail guns.
3 SUMAKE F18 / 30
The compact SUMAKE F18 / 30 nailer is the best choice for renovation work based on the combination of different materials. Its pneumatic device allows for a continuous production process. At the same time, the engine has increased resistance to overloads and has a decent margin of safety. Consuming 0.5 liters of air per shot, this tool needs an operating pressure of 4 to 6.2 bar - this guarantees it the best performance.
A distinctive feature of the SUMAKE F18 / 30 pistol is the use of finishing anchors, which are practically invisible in the material due to the absence of a cap. This model provides a spacious magazine for fasteners, designed for 100 nails, the maximum size of which does not exceed 30 mm. It is very comfortable to work with this pneumatic tool due to its light weight and comfortable anti-slip grip.
2 Metabo DKNG 40/50
The compact Metabo DKNG 40/50 pneumatic nailer, which is also suitable for driving staples, is the best choice for interior finishing work such as skirting boards or wood paneling, etc. Ergonomic design combined with light weight (1.1 kg) allow using this tool in the most difficult to reach places. When choosing accessories, you should pay attention to SKN nails with a length of 15-50 mm, and staples with a size of 15-40 mm. This gun exhibits excellent performance at a compressor pressure of 5-7 bar. In this case, the air consumption per blow is 6.6 liters.
Made of composite material, the body of the Metabo DKNG 40/50 nailer has the lowest vibration levels during operation. This model provides protection against overload and accidental starting - the safety of the operator is paramount. Thanks to the convenient air outlet, dust and swirls do not interfere at all during the working process. The Metabo DKNG 40/50 nail gun, like all products of this manufacturer, is distinguished by its reliability and the longest service life.
1 Fubag N90
The Fubag N90 pneumatic nailer allows a large amount of work to be done with virtually no interruption or operator fatigue. Since this tool runs on compressed air, with an approximate flow rate of 120 l / min, it presents the lowest possible flammability during the production process.The magazine of the Fubag N90 nail gun is located at a convenient angle relative to the working surface, and is designed for 50 nails with a section of 2.8-3.8 mm and a length of 50-90 mm. At the same time, the replacement of the tooling is very easy and quick. During operation of this model, it is necessary to maintain a compressor outlet pressure of 4-7.5 bar, while the recommended diameter of the air supply hose is 3/8 inch.
The Fubag N90 nail gun is not lightweight, which is 3.75 kg. At the same time, it is absolutely irreplaceable when performing some types of work, especially at an angle, with which it is impossible to cope with tools of other brands. To ensure comfortable holding of the pistol with one hand during operation, it has an ergonomic handle.
Best Electric Nail Guns
The most common electric nail guns among frame system installers and furniture makers use a 220V connection and are limited by the length of the wire. Stand-alone models with a rechargeable battery are capable of working in any conditions. It is the most suitable tool for soft roofing installers, electricians, etc. The category presents the best models of the market.
4 BISON ZSP-2000
The ZUBR ZSP-2000 electric pistol is perfect for solving various repair and construction tasks using nails and staples. The power consumption of the instrument in 2000 W is sufficient to ensure the speed of the working process of 20 beats / min. At the same time, depending on the characteristics of the material and the size of the fastener, you can adjust the impact force. This electric gun is compatible with 55 staples and 300 type nails, with a possible minimum length of 15 mm. Despite its compact size, the presented nailing tool demonstrates the best performance indicators, which are provided due to the high frequency of operations.
The model provides a two-level protection, which excludes accidental pressing and activation of the driving mechanism in conditions of its loose adhesion to the surface. The presence of a metal clip holder and a hardened striker in the ZUBR ZSP-2000 nail gun have a positive effect on the service life. The attractive price of the network set multiplies the characteristics of the tool, making the model one of the most demanded on the market.
3 DeWalt DCN 692P2
The DeWalt DCN 692P2 cordless electric nail gun belongs to the professional tools and is designed for high-performance installation work with the longest nails. To be able to hammer fasteners with a length of 59 to 90 mm, this model provides a function for adjusting the impact force and power. Also, the device has two modes of operation - single and high-speed, which guarantees not only accuracy, but also maximum efficiency of the production process.
Thanks to the brushless motor of the DeWalt DCN 692P2 nail gun, the tool demonstrates not only the highest productivity, but also has an increased service life. Also, the device provides optimal comfort and safety for the operator during work, and compares favorably with the minimum indicators of noise and vibration levels. The pistol's compact size allows it to be used in the most difficult-to-reach places. The continuous operation of the tool is ensured by powerful batteries with a capacity of 5 A * h, of which there are 2 pcs. The device is delivered in a convenient case, which simplifies its storage and transportation.
2 Makita DPT 353RFE (DPT353RFE)
The presented model of a nail gun will become an indispensable assistant for a professional who specializes in serial fastening of any materials to a wooden surface. The main advantage of the Makita DPT 353RFE is the presence of a battery with a voltage of 18 Volts and a capacity of 3 A * h, which guarantees the autonomous operation of the tool.This gun comes with 2 Li-ion batteries, the charge level of which can be monitored on a special indicator. Automatic battery protection prevents their complete discharge and failure due to overloads.
Working with long nails is much easier with this electric tool. The magazine with a capacity of 130 fasteners is very easy to load pins with a length of 15 to 35 mm. At the same time, it is possible to set the required driving depth to ensure the highest accuracy of fasteners. For working in poorly lit areas, the Makita DPT 353RFE nailer is equipped with a backlight. Also, the device is equipped with protection against accidental start-up and a convenient bracket for possible attachment to the belt.
1 STANLEY HAND TOOLS STANLEY 6-TRE650
The STANLEY 6-TRE650 electric nail gun from the world's most famous tool manufacturer is designed for professional use. With its help, fast fixation of any material to the surface is carried out using special nails, without leaving any traces on it. This model is compatible with 5 different sizes of consumables: 15, 19, 25, 30 and 32 mm. To save time when working with the STANLEY 6-TRE650 nail gun, it has a spacious magazine for pins with the ability to quickly change them through a special window.
A cable length of 2.5 meters is sufficient for convenient movement with the tool around the work site, but, as a rule, an extension cord is indispensable. Safe control of the pistol is carried out using the trigger, it is also possible to adjust the force of the blow, adjusting to the specific material. For the operator's convenience, during prolonged work, the STANLEY 6-TRE650 nailing tool has a rubberized handle for a secure grip and holding the tool in one hand. The presented pistol differs from pneumatic models in increased productivity, significantly reducing time costs.
Best Gas Nailer Guns
Professional equipment has the best ability to work independently and is an indispensable tool for professionals performing industrial installations. The category presents the most popular models in the Russian market for gas nailing guns.
3 SPIT Pulsa 800P +
The presented model of the SPIT Pulsa 800P + nail gun guarantees the fastest and safest installation of any structures and materials. This tool demonstrates excellent speed, firing 2 shots per second. At the same time, the implementation of each requires only 4.5 kg of effort. The effectiveness of the device also depends on the degree of filling of the gas cylinder, which allows up to six hundred shots to be fired. To charge the pistol, a magazine for 20 nails is provided, which can be replaced with a more spacious one (50 pieces). The length of the bindings designed to work with the SPIT Pulsa 800P + can vary from 15 to 40 mm.
A distinctive feature of this nailing tool is the Start & Go function, which significantly saves energy. In the event of a minute of inactivity, the gun automatically turns off as soon as movement occurs - the device will be ready for work again. The presence of a display, which shows the level of charge of the battery and the cylinder, will save time on the forced shutdown of the production process.
2 Toua GSN F1
For large volumes of installation work on concrete or steel, the Toua GSN F1 gas nailer is the best choice, as it delivers the most power when hammering in the nail, ensuring a secure hold. This tool does not require any additional maintenance or lubrication, as well as special skills. A distinctive feature of the model is the widest operating temperature range from -15 to +50 ° C. Also, this gun can be used in the absence of a compressor and electricity.
The capacity of the gas cylinder is enough for 1000-1400 strokes, which the Toua GSN F1 nail gun produces with a force of 100 J. Due to the fact that the tool is lightweight, it is very convenient for them to perform electrical work and shoot to the ceiling. This pistol has a set of 2 barrels: one is used for shallow depth, the other is with a soft nozzle for maximum penetration. This ensures the integrity of the working surface of the material. The set includes two Li-Ion batteries with a capacity of 1.5 Ah, thanks to which you can shoot about 8000 nails, gas cylinders would be refueled. You can keep track of the battery charge thanks to the indicator on the handle.
1 Lixie LXJG-III
The professional Lixie LXJG-III nail gun is a gas-powered tool with a high power. It can be used to carry out installation work with the most durable materials such as steel, concrete, masonry, etc., without requiring preliminary drilling. A serious amount of work to zero in plastic or steel parts, carried out in a short period of time, is possible due to the high speed of the tool. The nails that are required to work with this gun must be 17-32 mm in size.
The Lixie LXJG-III nailer is equipped with a 10,000 mA battery that takes 150 minutes to recharge. The volume of the gas cylinder of this device, provided it is fully filled, is sufficient to drive 1250 nails. The mountings made with this pistol are characterized by high accuracy and reliability. The package includes 2 batteries, a charger, earplugs, glasses and a durable case.
