10 best circulation pumps

In heating circuits of a closed cycle, water moves through pipes due to heating. Warm masses displace the colder ones, and they, in turn, enter the heating boiler, and an endless movement begins, which heats the pipes in our houses. But everything looks perfect only in one-story houses, when, in addition to heating, the water is pushed by the slope of the pipes. But what if you need to raise it to the second or third floor? The water itself will not rise above the boiler level.

There is a way out - a circulation pump. This device pumps water and lifts it up. A very convenient and necessary tool, but before buying, you need to clearly determine what power you need. The pumps cost from a thousand to 20 thousand rubles, and such a run-up appears due to the initial power of the device. Inexpensive pumps are able to raise water a short distance, while more expensive pumps provide heat even to the tallest houses. But this is not the only criterion when choosing a circulation pump. In addition to power, you should pay attention to the following aspects:

• Loudness of work. Some pumps are so loud that you can hear them even from a very long distance. There are models that are inaudible, even if you stand nearby.
• Build quality. Pump failure can lead to unpleasant consequences and costly repairs. Especially if it cannot withstand the pressure and leaks.
• Bandwidth. The longer the heating circuit, the greater the throughput must be. Also pay attention to this parameter when installing a pump on a water supply system.
• Availability of control systems. The cheapest models have no protection systems at all. And the more expensive ones boast sophisticated electronics that carefully monitor all parameters in the heating or water supply system.
• Temperature conditions. Many pumps stop working at temperatures close to zero. This is normal as the water begins to freeze. But there are models with special protection. They can be installed even outdoors, or in an unheated room.

As you can see, the choice is quite difficult, and to make it easier for you, we have selected the 10 most interesting options, and divided them into three categories. The first category contains the cheapest pumps costing up to 2 thousand rubles. In the second, from 2 to 10 thousand, and in the third, the best circulation pumps costing more than 10 thousand are presented.

The best circulation pumps costing up to 2,000 rubles

In some cases, it makes no sense to overpay for expensive equipment. For example, in a situation where you just need to increase the water pressure in the system or help the heating system warm up the entire circuit faster. Pumps costing less than 2 thousand rubles will not be able to raise the water too high, and if the manufacturer assures you otherwise, think about why this is happening. And did he save on other aspects, in particular on the build quality.

3 Wester WCP 25-60G

Pump performance is one of the main selection criteria. It is easy to guess that the higher it is, the more expensive the pump is. For example, in this price category, the average performance is 2 cubic meters per hour, and the maximum lifting height of the liquid is three meters. But in our case, the indicators are much higher. The pump is able to raise water to a height of 6 meters, and this is already a full-fledged two-story house. At the same time, he passes through himself up to three cubic meters of water per hour.

Another important plus of the device is the ability to be installed horizontally or vertically. Most devices have limitations on this, but here you do not have to redo the entire system to install a conventional pump. But, unfortunately, we cannot call it the best. There are several disadvantages noted in user reviews. In particular, the pump noise is quite high.If you plan to put it directly in the house, and not in a separate room, then it is better to pay attention to another model.

2 UNIPUMP UPC 32-60

Different companies participate in the rating of circulating pumps, but in most cases they are of Russian origin. And this example is no exception. The company produces components for heating and water supply systems and primarily pays attention to the reliability and durability of its products. For example, this pump is made entirely of metal, which significantly increases its service life and also improves operating efficiency.

But with the power consumption, the manufacturer disappointed a little. Here it is one hundred watts, which is quite a lot for such a "kid", but he is able to raise the water pressure in the pipes to a height of 6 meters, and such parameters are already considered quite high, and most often, such pumps are much more expensive. The throughput capacity is almost 4 cubic meters per hour, which is also the norm. In fact, such a pump can be installed in a two-story house, provided that you do not have 4 meter ceilings, and it will easily provide it with heat and water.

1 VORTEX TsN-25-4

The Russian company Vikhr has long established itself on the market as a manufacturer of high-quality and reliable elements for heating and water supply systems. Their products are often called the best, and this applies to almost all aspects. Specifically in this model, the build quality is especially highlighted. It really is at its best, and with such a pump you can not be afraid of leaks and unexpected malfunctions. The manufacturer himself gives a two-year warranty, and as experts say, you are unlikely to need it.

As for the technical parameters, they fully correspond to the price of the device. The throughput capacity is only 3 cubic meters per hour, and the maximum height to which the pump is capable of pumping water is 4 meters. For more expensive pumps, this is very small, but in this price category, the parameters are very impressive. Also, the pump is the most economical. It consumes only 72 watts at maximum load, and 36 watts during normal operation. This is less than a standard incandescent light bulb.

The best circulation pumps costing up to 10,000 rubles

Logically, circulation pumps costing about 10 thousand rubles should have higher technical characteristics than their cheaper counterparts. However, this is not quite true. Above are far from all the parameters, and mainly it is about energy saving. If in pumps costing up to 2 thousand energy consumption averages 100 watts per hour, then here this figure is almost ten times lower.

3 Grundfos Comfort 15-14 B PM

The appearance of the circulation pump is far from the most important parameter, and is rarely paid attention to. But what if, in your home, the heating system and its elements are installed in a conspicuous place? Why not make her beautiful. And here we have the most unusual pump in terms of appearance. It does not need to be hidden or hidden, and this is far from its only advantage.

First of all, we look at the manufacturer. It is the best company in the field of heating and water supply. All of their products are consistently durable and reliable. In addition, it is also the most economical pump, consuming only 7 watts per hour. The throughput is 1.5 cubic meters, and the lifting height is 1.4 meters. These are quite average indicators, and the pump can only work in one-story houses and with restrictions on the length of the heating circuit. On the other hand, it works completely silently, and for circulation pumps this is one of the most important parameters that many manufacturers have not been able to achieve.

2 Wilo Star-Z Nova

If you are looking for the most economical circulation pump, and the issue of electricity consumption is not in the last place for you, be sure to pay attention to this model. Before us is the most economical device. Its consumption is only 5 watts per hour, and this is much lower than even an energy-saving light bulb.

What is such an economical device capable of? In fact, not much. Productivity is only half a cubic meter per hour, and the maximum liquid rise is carried out to a height of up to 1.1 meters. This is very small, and in a private house such a pump will most likely not be enough. But, this is a great option for a summer residence or a small building, for example, a garage or a bathhouse. He will not be able to provide a full-fledged house with running water, and it will be difficult for him to fill the heating circuit. But on the other hand, you will not see huge electricity bills, and the pump itself will last a very long time, since it is also equipped with overheating sensors.

1 Grundfos ALPHA2 L 25-40 180

Before us is one of the leaders of the modern market. The company that makes the best circulating pumps and not only them. A distinctive feature of this brand is the high quality of all products. As for this particular example, the first thing that catches your eye when reading its characteristics is power consumption. Only 22 watts per hour, and this is comparable to an economical light bulb. Also, the advantages include built-in overheating protection. It is known that the pump starts to get very hot during long-term operation, and for many models this becomes a problem. Special sensors are also installed here to protect the device from failure.

As for the rest of the technical parameters, the pump has nothing to boast about. Its productivity is only 2.5 cubic meters per hour, and the maximum lifting height is 4 meters. This device is hardly suitable for a two-story house, and it was not designed for such use from the very beginning. But for many years after installation, you will not worry about the safety and performance of the pump, since the manufacturer guarantees high quality, and even gives five years of warranty service.

The best circulation pumps costing over 10,000 rubles

If you are faced with the task of providing heat and water to a two or more storey building, then it is better to forget about saving on the circulation pump. Not every device is capable of lifting liquid to a height of over 6 meters, and the performance is much higher here. Such devices cost more than 10 thousand, and there is simply no upper threshold. We have selected for you several of the most interesting options, with the best characteristics, and with a not deterrent price tag.

4 Wilo Yonos PICO 25 / 1-6

If you are used to everything and always control, then be sure to pay attention to this circulation pump for heating. Its main advantage is an informative sensor and the ability to make precise settings at your discretion. As a rule, pumps are taken with a margin, and they work at full capacity. That is, if the pump consumes 300 watts, then this indicator will not change, even if this load is excessive. In this case, you can set the necessary parameters yourself, and configure the pump specifically for your heating system.

The device is equipped with an electronic display, where information is displayed that you can change by pressing just one button. It is very convenient and allows you to save money, which is very important. In addition, it is one of the cheapest devices in its segment due to its technical characteristics. The throughput of the pump is 4 cubic meters per hour, and the lifting height is up to 6 meters. But this is at maximum load. Accordingly, by reducing the parameters in the settings, you will reduce the rest of the characteristics.

3 DAB EVOSTA 3 60/180

The water temperature in winter rarely drops below the critical mark, but if it still falls below 10 degrees, most pumps simply will not work with it. In a residential building, there will be no problems with this, but in the country or in a country house, you can easily face a situation when, after your long absence, you find that there is no water in the tap. What to do? The best option is to install this pump from a renowned Italian manufacturer. It is capable of handling liquids from minus 10 to plus 120 degrees.

This became possible thanks to the unique heat exchange system provided by the ceramic insert. As you know, ceramics have low thermal conductivity, and can work like a thermos, keeping the same temperature for a long time. As for the other parameters, they are average here. The rise of water is carried out to a height of no more than 3.6 meters, which is quite small for a pump with such a price tag. The carrying capacity is also not up to the mark - 6 cubic meters. Simply put, this is the best option for a summer residence or a country estate, but for installation in your home, it is better to look for a more powerful model.

2 JILEX Compasses 32/80

Denmark is the undisputed leader in the circulating pump market, but Russia does not lag behind it and produces devices with excellent characteristics and at the most attractive prices. For example, this pump is cheaper than its European counterparts, and at the same time has high performance. So, its throughput is 12 cubic meters per hour, and the rise of water is carried out to a height of 8 meters, which is a lot.

The device itself is rather big, and this is one of its disadvantages. The pump weighs 6 kilograms and can only be installed vertically. It should also be understood that with such parameters, the pump consumes a lot of electricity. Here it is 240 watts per hour, which is slightly higher than that of competitors. In addition, the pump does not have temperature protection, and is capable of working only with water whose temperature is not lower than 10 degrees. In fact, this is not a problem, since even in winter the water is rarely colder, but in extreme conditions it is better not to leave such a device.

1 Grundfos UPS 32-80 180

If you see products of this brand on the counter of a store, you can safely buy it, since quality, reliability and durability are ensured. The company manufactures pumps in different categories. There are also very weak models in their arsenal, with minimal power consumption. There are also more expensive ones, such as this device. This is the best pump in its category, with the highest performance. Its productivity is 11 cubic meters per hour, and the maximum liquid rise level is 8 meters. This is a lot, and with such parameters it can be easily installed into the heating system of even a three-story building.

Of course, such parameters could not but affect energy consumption, and this is natural. This pump consumes 220 watts per hour. But it is capable of pumping liquid with temperatures ranging from minus 25 to plus 110 degrees. How is the overheating issue solved in this case? The manufacturer took care of this and installed special sensors on the device that control the degree of heating of the pump, and ensure its long-term operation in the most aggressive conditions.